Effect of Operating Conditions of the Extraction Process on the Physical Properties of Lubricating Oil
DOI:
https://doi.org/10.6000/1929-5030.2015.04.01.1Keywords:
Lubricating oil, Liquid-Liquid Extraction, Optimization.Abstract
Lubricating base oil is commonly extracted from lube-oil cut, a petroleum cut, with the use of an aromatic solvent. Aromatic content of the final product is an important criterion specifying the product quality. The aromatic removal process to produce the lubricating oil should be carried out in a Liquid-Liquid extraction column. In a typical solvent extraction process, solvent to feed ratio, solvent and feed temperatures, agitation rate, and settling time could directly affect the yield of extraction. In the current study, the effect of agitation rate and settling time on the yield of extraction was studied. It was found that a settling time of 2hrs and an agitation rate of 430 RPM to be the optimum parameters of the extraction process.References
[1] Willis G. Lubrication Fundamentals, second Ed. New York. (1984)
[2] Singh H, Kishore K. Solvent refining of medium viscosity distillate and changes in group chemical composition. J Appl Chem Biotechnol 1978; 28: 617-25.
[3] Sequeira A. Lubricant Base oil and Wax processing. Marcel Dekker,) New York (1994) pp. 81-2.
[4] Espada JJ, Coto B, Grieken R, Moreno JM. Simulation of pilot-plant extraction experiments to reduce the aromatic content from lubricating oil. Chem Eng Proc 2008; 47: 1398- 403. http://dx.doi.org/10.1016/j.cep.2007.06.012
[5] Vakili-Nezhad GR, Modares H, Mansoori GA. Solvent extraction of aromatic components from lube-oil cut by nmethylpyrrolidone(NMP). Chem Eng Tech 1999; 22: 847-53. http://dx.doi.org/10.1002/(SICI)1521- 4125(199910)22:10<847::AID-CEAT847>3.0.CO;2-P
[6] Nelson WL. Petroleum Refining Engineering, fourth ed.McGraw-Hill, New York, 1978.
[7] De Lucas A, Rodriguez L, Sanchez P, Carnicer A. Extraction of aromatic compounds from heavy neutral distillate lubricating oils by using furfural. Sep Sci Tech 1993; 28: 2465-77. http://dx.doi.org/10.1080/01496399308019749
[8] Mcketta JJ. Encyclopedia of Chemical processing and design, Marcel Dekker) New York (1989).
[9] Coto B, Grieken R, Pena JL, Espada JJ. A generalized model to predict the liquid-liquid equilibrium in the system of furfural + lubricating oils. Chem Eng Sci 2006; 61: 8028-39. http://dx.doi.org/10.1016/j.ces.2006.09.037
[10] Coto B, Grieken R, Pena JL, Espada JJ. A model to predict physical properties for light lubricating oils and its application to the extraction process by furfural. Chem Eng Sci 2006; 61: 4381-92. http://dx.doi.org/10.1016/j.ces.2006.02.009
[11] Rahman M, Mikitenko P, Asselineau L. Solvent extraction of aromatics from middle distillates. Chem Eng Sci 1984; 39: 1543-58. http://dx.doi.org/10.1016/0009-2509(84)80083-4
[12] Elbashir NO, Zahrani SM, Abdul Mutalib MI, Abasaeed AE. A method of predicting effective solvent extraction parameters for recycling of used lubricating oils. Chem Eng Proc 2002; 41: 765-9. http://dx.doi.org/10.1016/S0255-2701(02)00006-5
[13] El-Din OIS, Hassan SI, Taman AR, Farog AS. Recovery of waste lubricating oil by solvent extraction. Hungarian J Ind Chem 1987; 15: 357-64.
[14] Reis MA, Jernimo MS. Waste lubricating oil re-refining by solvent extraction flocculation. A scientific basis to design efficient solvents. Ind Eng Chem Res 1988; 27: 1222-8. http://dx.doi.org/10.1021/ie00079a023
[15] Chementator, solvent extraction process recycles waste oil. Chem Eng 1996; 103: 19.
[16] Hariu OH, Sage RC. Crude split figured by computer. Hydrocarbon Processing 1960; 48: 143-8.
[17] Briesen H, Marquradt W. New approach to refinery process simulation with adaptive composition representation. AIChE J 2004; 50: 633-45. http://dx.doi.org/10.1002/aic.10057
[18] ASTM Annual Book of Standard, American Society for testing and Materials, vol. 5. West Conshohocken, 2003.
[19] Riazi MR, Daubert TE. Prediction of molecular-type analysis of petroleum fraction and coal liquids. Ind Eng Chem Proc 1986; 25: 1009-15. http://dx.doi.org/10.1021/i200035a027
[20] ASTM Annual Book of Standard, Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method, West Conshohocken, 2004.
[21] ASTM Annual Book of Standard, Estimation of Mean Relative Molecular Mass of Petroleum oils from Viscosity Measurements, West Conshohocken, 2004.
Downloads
Published
2015-02-25
How to Cite
Mehrkesh, A., Tavakoli, T., & Hatamipour, M. S. (2015). Effect of Operating Conditions of the Extraction Process on the Physical Properties of Lubricating Oil. Journal of Applied Solution Chemistry and Modeling, 4(1), 1–6. https://doi.org/10.6000/1929-5030.2015.04.01.1
Issue
Section
General Articles
License
Policy for Journals/Articles with Open Access
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are permitted and encouraged to post links to their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work
Policy for Journals / Manuscript with Paid Access
Authors who publish with this journal agree to the following terms:
- Publisher retain copyright .
- Authors are permitted and encouraged to post links to their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work .