Effect of Sodium Hydroxide on the Fast Synthesis of Superhydro-phobic Powder from Polymethylhydrosiloxane
DOI:
https://doi.org/10.6000/2369-3355.2014.01.02.7Keywords:
Superhydrophobic, polymethylhydrosiloxane, sodium hydroxide, synthesis, powder.Abstract
The paper reports the role of sodium hydroxide in the synthesis of a superhydrophobic powder from polymethylhydrosiloxane (PMHS) in the presence of ethanol and water. The effects of other basic and acidic solutions as well as the absence of water were also investigated. PMHS exhibited rapid gelation (from 8 h to 2 h) by increasing the concentration of sodium hydroxide in the presence of ethanol and water. In contrast, gelation did not occur in the absence of sodium hydroxide or water or in the presence of acidic solutions. Delayed gelation (96 h to 120 h) occurred as a result of the introduction of dipotassium hydrogen phosphate trihydrate. Superhydrophobic powder was obtained by the evaporation of solvents from the gelated sol at 150 °C. The surface properties of the superhydrophobic powder were examined by scanning electron microscopy, high resolution transmission electron microscopy, N2 sorption isotherm, and X-ray diffraction. The particle size, functional groups and thermal stability of the powder were analyzed by dynamic light scattering spectroscopy, Fourier transform infrared spectroscopy, 29Si cross polarization magic angle spinning nuclear magnetic resonance spectroscopy, and thermogravimetric analysis. The surface properties of the powder were also assessed by contact angle measurements. The results showed that increasing the concentration of sodium hydroxide added to PMHS or increasing the drying temperature of the gelated sol resulted in the more rapid formation of superhydrophobic powder.
References
Onda T, Shibuichi S, Satoh N, Tsujii K. Super-water-repellent fractal surfaces. Langmuir 1996; 12: 2125-7. http://dx.doi.org/10.1021/la950418o DOI: https://doi.org/10.1021/la950418o
Barthlott W, Neinhuis C. Purity of the sacred lotus or escape from contamination in biological surfaces. Planta 1997; 202: 1-8. http://dx.doi.org/10.1007/s004250050096 DOI: https://doi.org/10.1007/s004250050096
Lafuma A, Quéré D. Superhydrophobic states. Nat Mater 2003; 2: 457-60. http://dx.doi.org/10.1038/nmat924 DOI: https://doi.org/10.1038/nmat924
Nagappan S, Park SS, Ha CS. Recent advances in superhydrophobic nanomaterials and nanoscale systems. J Nanosci Nanotechnol 2014; 14: 1441-62. http://dx.doi.org/10.1166/jnn.2014.9194 DOI: https://doi.org/10.1166/jnn.2014.9194
Nagappan S, Park JJ, Park SS, Lee WK, Ha CS. Bio-inspired, multi-purpose and instant superhydrophobic-superoleophilic lotus leaf powder hybrid micro-nanocomposites for selective oil spill capture. J Mater Chem A 2013; 1: 6761-9. http://dx.doi.org/10.1039/c3ta00001j DOI: https://doi.org/10.1039/c3ta00001j
Tian J, Fu N, Chen XD, Shen W. Respirable liquid marble for the cultivation of microorganisms. Colloids Surf B: Biointerfaces 2013; 106: 187-90. http://dx.doi.org/10.1016/j.colsurfb.2013.01.016 DOI: https://doi.org/10.1016/j.colsurfb.2013.01.016
Wu T, Chen M, Zhang L, et al. Three-dimensional graphene-based aerogels prepared by a self-assembly process and its excellent catalytic and absorbing performance. J Mater Chem A 2013; 1: 7612-21. http://dx.doi.org/10.1039/c3ta10989e DOI: https://doi.org/10.1039/c3ta10989e
Pang CH, Lee GY, Kim TI, et al. A flexible and highly sensitive strain-gauge sensor using reversible interlocking of nanofibers. Nat Mater 2012; 11: 795-801. http://dx.doi.org/10.1038/nmat3380 DOI: https://doi.org/10.1038/nmat3380
Yang DJ, Li JP, Xu Y, et al. Direct formation of hydrophobic silica-based micro/mesoporous hybrids from polymethylhydrosiloxane and tetraethoxysilane. Microporous Mesoporous Mater 2006; 95: 180-6. http://dx.doi.org/10.1016/j.micromeso.2006.05.022 DOI: https://doi.org/10.1016/j.micromeso.2006.05.022
Mozumder MS, Zhang H, Zhu J. Mimicking lotus leaf: Development of micro-nanostructured biomimetic superhydrophobic polymeric surfaces by ultrafine powder coating technology. Macromol Mater Eng 2011; 296: 929–36. http://dx.doi.org/10.1002/mame.201100080 DOI: https://doi.org/10.1002/mame.201100080
Zhao Y, Fang J, Wang H, Wang X, Lin T. Magnetic liquid marbles: Manipulation of liquid droplets using highly hydrophobic Fe3O4 nanoparticles. Adv Mater 2009; 21: 1–4. DOI: https://doi.org/10.1002/adma.200902512
Song W, Oliveira MB, Sher P, Gil S, Nóbrega JM, Mano JF. Bioinspired methodology for preparing magnetic responsive chitosan beads to be integrated in a tubular bioreactor for biomedical applications. Biomed Mater 2013; 8: 045008 (1-8). DOI: https://doi.org/10.1088/1748-6041/8/4/045008
Li XM, Reinhoudt D, Crego-Calama M. What do we need for a superhydrophobic surface? A review on the recent progress in the preparation of superhydrophobic surfaces. Chem Soc Rev 2007; 36: 1350–68. http://dx.doi.org/10.1039/b602486f DOI: https://doi.org/10.1039/b602486f
Qu HQ, Hao JW, Wu WH, Zhao XW, Jia S. Optimization of sol–gel coatings on the surface of ammonium polyphosphate and its application in epoxy resin. J Fire Sci 2012; 30: 357-71. http://dx.doi.org/10.1177/0734904112442360 DOI: https://doi.org/10.1177/0734904112442360
Nagappan S, Sung AR, Ha CS. Preparation of stable hydrophobic bio-based silica hybrid micro-nanocomposites. J Biobased Mater Bioenergy 2014; 8: 175-83. http://dx.doi.org/10.1166/jbmb.2014.1421 DOI: https://doi.org/10.1166/jbmb.2014.1421
Laine RM, Rahn JA, Youngdahl KA, et al. Synthesis and high-temperature chemistry of methylsilsesquioxane polymers produced by titanium-catalyzed redistribution of methylhydridooligo-and–polysiloxanes. Chem Mater 1990; 2: 464-72. http://dx.doi.org/10.1021/cm00010a028 DOI: https://doi.org/10.1021/cm00010a028
Han SH, Lee JY, Koo SM. Synthesis and characterization of polymethylsilsesquioxane-based hybrid polymers. J Ind Eng Chem 2004; 10: 813-20.
Huang YW, Liu WQ. Sol–gel composite coatings from methyltriethoxysilane and polymethylhydrosiloxane. J Sol-Gel Sci Technol 2010; 55: 261–8. http://dx.doi.org/10.1007/s10971-010-2243-4
Lawrence NJ, Drew MD, Bushell SM. Polymethylhydrosiloxane: A versatile reducing agent for organic Synthesis. J Chem Soc Perkin Trans 1999; 1: 3381–91. http://dx.doi.org/10.1039/a903662h DOI: https://doi.org/10.1039/a903662h
Nagappan S, Choi MC, Sung G, et al. Highly transparent, hydrophobic fluorinated polymethylsiloxane/silica organic-inorganic hybrids for anti-stain coating. Macromol Res 2013; 21: 669-80. http://dx.doi.org/10.1007/s13233-013-1069-7 DOI: https://doi.org/10.1007/s13233-013-1069-7
Nagappan S, Park JJ, Park SS, et al. Polymethylhydrosiloxane-based organic–inorganic hybrids for amphiphobic coatings. Compos Interfaces 2013; 20: 33-43. http://dx.doi.org/10.1080/15685543.2013.762892 DOI: https://doi.org/10.1080/15685543.2013.762892
Zhang B, Guo S, Shao B. Synthesis and characterization of liquid crystalline ionomers with polymethylhydrosiloxane main-chain- and side-chain-containing sulfonic acid groups. J Appl Polym Sci 1998; 68: 1555–61. http://dx.doi.org/10.1002/(SICI)1097-4628(19980606)68:10<1555::AID-APP2>3.0.CO;2-G DOI: https://doi.org/10.1002/(SICI)1097-4628(19980606)68:10<1555::AID-APP2>3.0.CO;2-G
Chauhan BPS, Sardar R. Self-assembled stable silver nanoclusters and nanonecklace formation: Poly(methylhydrosiloxane)-mediated one-pot route to organosols. Macromolecules 2004; 37: 5136-9. http://dx.doi.org/10.1021/ma0496798 DOI: https://doi.org/10.1021/ma0496798
Zhang Y, Chen HL, Wen Y, Yuan YB, Wu W, Liu C. Tunable wettability of monodisperse core-shell nano-SiO2modifiedwith poly(methylhydrosiloxane) and allyl-poly(ethylene glycol). Colloids Surf A: Physicochem. Eng. Aspects 2014; 441: 16– 24. http://dx.doi.org/10.1016/j.colsurfa.2013.08.079 DOI: https://doi.org/10.1016/j.colsurfa.2013.08.079
Yang DJ, Xu Y, Wu D, Sun YH, Zhu HY, Deng F. Superhydrophobic mesoporous silica with anchored methyl groups on the surface by a one-step synthesis without surfactant template. J Phys Chem C 2007; 111: 999-1004. http://dx.doi.org/10.1021/jp065815u DOI: https://doi.org/10.1021/jp065815u
Zhai SR, Song Y, Zhai B, An QD, Ha CS. One-pot synthesis of hybrid mesoporous xerogels starting with linear polymethylhydrosiloxane and bridged bis-(trimethoxysilyl)ethane. Microporous Mesoporous Mater 2012; 163: 178–85. http://dx.doi.org/10.1016/j.micromeso.2012.07.022 DOI: https://doi.org/10.1016/j.micromeso.2012.07.022
Brunauer S, Emmett PH, Teller E. Adsorption of gases in multimolecular layers. J Am Chem Soc 1938; 60: 309-19. http://dx.doi.org/10.1021/ja01269a023 DOI: https://doi.org/10.1021/ja01269a023
Nagappan S, Park SS, Yu EJ, et al. A highly transparent, amphiphobic, stable and multi-purpose poly(vinyl chloride) metallopolymer for anti-fouling and anti-staining coatings. J Mater Chem A 2013; 1: 12144-53. http://dx.doi.org/10.1039/c3ta11887h DOI: https://doi.org/10.1039/c3ta11887h
Uchida N, Ishiyama N, Kato Z, Uematsu K. Chemical effects of DCCA to the sol-gel reaction process. J Mater Sci 1994; 29: 5188-92. http://dx.doi.org/10.1007/BF01151115 DOI: https://doi.org/10.1007/BF01151115
Gardner KL, McNally G. The gel effect and its relationship to particle size distribution on the suspension polymerization of styrene-divinylbenzene systems. J Polym Sci: Polym Lett Edi 1978; 16: 267-70. http://dx.doi.org/10.1002/pol.1978.130160603 DOI: https://doi.org/10.1002/pol.1978.130160603
Hetem M, Rutten G, Vermeer B, et al. Deactivation with polymethylhydrosiloxane: A comparative study with capillary gas chromatography and solid-state 29Si nuclear magnetic resonance spectroscopy. J. Chromatogr A 1989; 477: 3-24. http://dx.doi.org/10.1016/S0021-9673(01)89614-X DOI: https://doi.org/10.1016/S0021-9673(01)89614-X
Huang YW, Liu WQ. Sol–gel composite coatings from methyltriethoxysilane and polymethylhydrosiloxane. J Sol-Gel Sci Technol 2010; 55: 261–68. http://dx.doi.org/10.1007/s10971-010-2243-4 DOI: https://doi.org/10.1007/s10971-010-2243-4
Yang D, Xu Y, Xu W, Wu D, Sun Y, Zhu H. Tuning pore size and hydrophobicity of macroporous hybrid silica films with high optical transmittance by a non-template route. J Mater Chem 2008; 18: 5557-62. http://dx.doi.org/10.1039/b804967j DOI: https://doi.org/10.1039/b804967j
Downloads
Published
How to Cite
Issue
Section
License
Policy for Journals/Articles with Open Access
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are permitted and encouraged to post links to their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work
Policy for Journals / Manuscript with Paid Access
Authors who publish with this journal agree to the following terms:
- Publisher retain copyright .
- Authors are permitted and encouraged to post links to their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work .