Response Surface Optimization of Electro-Spun Polyvinyl Alcohol Nano-Fiber Membrane Process Parameters and its Characterization

Authors

  • Kibrom Alebel Gebru Department of Chemical Engineering, Indian Institute of Technology Guwahati-781039, Assam, India
  • Chandan Das Department of Chemical Engineering, Indian Institute of Technology Guwahati-781039, Assam, India

DOI:

https://doi.org/10.6000/1929-6037.2016.05.04.3

Keywords:

Electro-spinning, RSM, Crosslinking, PVA, Thermal analysis.

Abstract

An empirical exploration into the effects of time duration, voltage supply, concentration and flow rate on the membrane average fiber diameter and surface pore size distribution were done using response surface methodology (RSM) based on central compact design (CCD). The average fiber diameter and average surface pore diameter of the membrane (i.e. 110 nm and 130 nm, respectively) were obtained at optimum input parameters of 45 min, 10 wt. %, 12 kV and 1.0 mL/h for time duration, concentration, voltage supply, and flow rate, respectively. The optimization study shows that the predicted versus actual values of both membrane fiber diameter and surface pore diameter are at R2 = 0.96. In addition, the effect of glutaraldehyde on membrane crosslinking was also assessed for further studies. The results from FESEM images of the fabricated PVA nanofiber membranes using the optimized parameters revealed that the membranes showed smooth morphological structures without formation of beads. The thermo gravimetric analysis (TGA) results displayed an improvement in thermal stability after membrane crosslinking. From this study we have observed that the membrane average fiber diameter and surface pore diameter can be controlled by varying the electro-spinning parameters and can be utilized for wastewater treatment application.

References

Koski A, Yim K, Shivkumar S. Effect of molecular weight on fibrous PVA produced by electrospinning. Mater Lett 2004; 58(3-4): 493-497. https://doi.org/10.1016/S0167-577X(03)00532-9 DOI: https://doi.org/10.1016/S0167-577X(03)00532-9

Mohammad Ali Zadeh M, Keyanpour-Rad M, Ebadzadeh T. Effect of viscosity of polyvinyl alcohol solution on morphology of the electrospun mullite nanofibres. Ceram Int 2014; 40(4): 5461-5466. https://doi.org/10.1016/j.ceramint.2013.10.132 DOI: https://doi.org/10.1016/j.ceramint.2013.10.132

Xuefen Wang, Dufei Fang, Kyunghwan Yoon, Benjamin S. Hsiao, Chu B. High performance ultrafiltration composite membranes based on poly(vinyl alcohol) hydrogel coating on crosslinked nanofibrous poly(vinyl alcohol) scaffold. J Membr Sci 2006; 278(1-2): 261-268. https://doi.org/10.1016/j.memsci.2005.11.009 DOI: https://doi.org/10.1016/j.memsci.2005.11.009

Yoon K, Hsiao BS, Chu B. High flux ultrafiltration nanofibrous membranes based on polyacrylonitrile electrospun scaffolds and crosslinked polyvinyl alcohol coating. J Membr Sci 2009; 338(1-2): 145-152. https://doi.org/10.1016/j.memsci.2009.04.020 DOI: https://doi.org/10.1016/j.memsci.2009.04.020

Zhu X, Loo H-E, Bai R. A novel membrane showing both hydrophilic and oleophobic surface properties and its nonfouling performances for potential water treatment applications. J Membr Sci 2013; 436: 47-56. https://doi.org/10.1016/j.memsci.2013.02.019 DOI: https://doi.org/10.1016/j.memsci.2013.02.019

Santos C, Silva CJ, Büttel Z, Guimarães R, Pereira SB, Tamagnini P, et al. Preparation and characterization of polysaccharides/PVA blend nanofibrous membranes by electrospinning method. Carbohyd Polym 2014; 99: 584-592. https://doi.org/10.1016/j.carbpol.2013.09.008 DOI: https://doi.org/10.1016/j.carbpol.2013.09.008

Yang Liu RW, Hongyang Ma, Benjamin S. Hsiao, Benjamin Chu. High-flux microfiltration filters based on electrospun polyvinylalcohol nanofibrous membranes. Polymer 2013; 54(2): 548-556. https://doi.org/10.1016/j.polymer.2012.11.064 DOI: https://doi.org/10.1016/j.polymer.2012.11.064

Puguan JMC, Kim H-S, Lee K-J, Kim H. Low internal concentration polarization in forward osmosis membranes with hydrophilic crosslinked PVA nanofibers as porous support layer. Desalination 2014; 336: 24-31. https://doi.org/10.1016/j.desal.2013.12.031 DOI: https://doi.org/10.1016/j.desal.2013.12.031

Ramakrishna S, Fujihara K, Teo W-E, Lim T-C, Ma Z. An Introduction to Electrospinning and Nanofibers 1st edition ed, Singapore: World Scientific 2005. https://doi.org/10.1142/5894 DOI: https://doi.org/10.1142/9789812567611

Barhate RS, Loong CK, Ramakrishna S. Preparation and characterization of nanofibrous filtering media. J Membr Sci 2006; 283(1-2): 209-218. https://doi.org/10.1016/j.memsci.2006.06.030 DOI: https://doi.org/10.1016/j.memsci.2006.06.030

Ba? D, Boyac? ?H. Modeling and optimization I: Usability of response surface methodology. J Food Eng 2007; 78(3): 836-845. https://doi.org/10.1016/j.jfoodeng.2005.11.024 DOI: https://doi.org/10.1016/j.jfoodeng.2005.11.024

Yördem OS, Papila M, Mencelo?lu YZ. Effects of electrospinning parameters on polyacrylonitrile nanofiber diameter: An investigation by response surface methodology. Mater Des 2008; 29(1): 34-44. https://doi.org/10.1016/j.matdes.2006.12.013 DOI: https://doi.org/10.1016/j.matdes.2006.12.013

Bezerra MA, Santelli RE, Oliveira EP, Villar LS, Escaleira LA. Response surface methodology (RSM) as a tool for optimization in analytical chemistry. Talanta 2008; 76(5): 965-977. https://doi.org/10.1016/j.talanta.2008.05.019 DOI: https://doi.org/10.1016/j.talanta.2008.05.019

Ferreira SLC, Bruns RE, da Silva EGP, dos Santos WNL, Quintella CM, David JM, et al. Statistical designs and response surface techniques for the optimization of chromatographic systems. J Chrom A 2007; 1158(1-2): 2-14. https://doi.org/10.1016/j.chroma.2007.03.051 DOI: https://doi.org/10.1016/j.chroma.2007.03.051

Khanlou HM, Ang BC, Talebian S, Barzani MM, Silakhori M, Fauzi H. Multi-response analysis in the processing of poly (methyl methacrylate) nano-fibres membrane by electrospinning based on response surface methodology: Fibre diameter and bead formation. Measurement 2015; 65: 193-206. https://doi.org/10.1016/j.measurement.2015.01.014 DOI: https://doi.org/10.1016/j.measurement.2015.01.014

Ahmadipourroudposht M, Fallahiarezoudar E, Yusof NM, Idris A. Application of response surface methodology in optimization of electrospinning process to fabricate (ferrofluid/polyvinyl alcohol) magnetic nanofibers. Mater Sci Eng C 2015; 50: 234-241. https://doi.org/10.1016/j.msec.2015.02.008 DOI: https://doi.org/10.1016/j.msec.2015.02.008

Bose S, Das C. Role of Binder and Preparation Pressure in Tubular Ceramic Membrane Processing: Design and Optimization Study Using Response Surface Methodology (RSM). Ind Eng Chem Res 2014; 53(31): 12319-12329. https://doi.org/10.1021/ie500792a DOI: https://doi.org/10.1021/ie500792a

Feng C, Khulbe KC, Matsuura T, Tabe S, Ismail AF. Preparation and characterization of electro-spun nanofiber membranes and their possible applications in water treatment. Sep Purif Technol 2013; 102: 118-135. https://doi.org/10.1016/j.seppur.2012.09.037 DOI: https://doi.org/10.1016/j.seppur.2012.09.037

Ran Wang YL, Brandon Li, Benjamin S. Hsiao, Benjamin Chu. Electrospun nanofibrous membranes for high flux microfiltration. J Membr Sci 2012; 392-393: 167-174. https://doi.org/10.1016/j.memsci.2011.12.019 DOI: https://doi.org/10.1016/j.memsci.2011.12.019

Yang E, Qin X, Wang S. Electrospun crosslinked polyvinyl alcohol membrane. Mater Lett 2008; 62(20): 3555-3557. https://doi.org/10.1016/j.matlet.2008.03.049 DOI: https://doi.org/10.1016/j.matlet.2008.03.049

Zhang C-H, Yang F-l, Wang W-J, Chen B. Preparation and characterization of hydrophilic modification of polypropylene non-woven fabric by dip-coating PVA (polyvinyl alcohol). Sep Purif Technol 2008; 61(3): 276-286. https://doi.org/10.1016/j.seppur.2007.10.019 DOI: https://doi.org/10.1016/j.seppur.2007.10.019

Xuefen wang, xuming chen, kyunghwan yoon, dufei fang, benjamin s. hsiao, chu b. High Flux Filtration Medium Based on Nanofibrous Substrate with Hydrophilic Nanocomposite Coating.pdf. Environ Sci Technol 2005; 39: 7684- 7691. https://doi.org/10.1021/es050512j DOI: https://doi.org/10.1021/es050512j

Mansur HS, Sadahira CM, Souza AN, Mansur AAP. FTIR spectroscopy characterization of poly (vinyl alcohol) hydrogel with different hydrolysis degree and chemically crosslinked with glutaraldehyde. Mater Sci Eng C 2008; 28(4): 539-548. https://doi.org/10.1016/j.msec.2007.10.088 DOI: https://doi.org/10.1016/j.msec.2007.10.088

Deepak AM, Ashwani K. Effects of surface crosslinking on sieving characteristics of chitosan: poly(acrylonitrile) composite nanofiltration membranes. Sep Purif Technol 2000; 21: 27-38. https://doi.org/10.1016/S1383-5866(00)00188-X DOI: https://doi.org/10.1016/S1383-5866(00)00188-X

Downloads

Published

2023-04-28

How to Cite

Gebru, K. A., & Das, C. (2023). Response Surface Optimization of Electro-Spun Polyvinyl Alcohol Nano-Fiber Membrane Process Parameters and its Characterization. Journal of Membrane and Separation Technology, 5(4), 140–156. https://doi.org/10.6000/1929-6037.2016.05.04.3

Issue

Section

Articles