Structurally Functionalized Polyurethane Foam for Elimination of Lead Ions from Drinking Water
DOI:
https://doi.org/10.6000/1929-5995.2014.03.01.3Keywords:
Adsorption, Functionalized, Ion exchange, Polyurethane foams, SulfonicAbstract
Polyurethane foams functionalized with Sulfonic acid groups have been found to be strong cation exchangers. This novel property of the foam was used to exchange lead (Pb2+) ions from aqueous solutions. Polyurethane foam synthesis is based on addition polymerization of the highly reactive isocyanate (-NCO) groups of an isocyanate with the hydroxyl (–OH) groups of a polyol to form the urethane species. Toluene-2,4-2,6- diisocyanate was reacted with Polypropylene glycol 1200 in 2:1 molar ratio to form a linear pre-polymer. The linear pre-polymer was further polymerized using a chain extender, N, N-bis (2-hydorxyethyl)-2-aminoethane-sulfonic acid (BES). BES also acts as a functional group to exchange Pb2+ ions. A set of experiments were designed to study various process parameters. The functionalized polyurethane foam was characterized by Fourier transform infrared spectroscopy, gel permeation chromatography, scanning electron microscopy, and energy dispersive x-ray spectroscopy. The Pb2+ ion exchange capacity was determined using an Inductively Coupled Plasma Mass Spectrometer. The maximum Pb2+ ion exchange capacity of the foam was found to be 47 parts per billion per gram (ppb/g) from a 100 parts per billion (ppb) Pb2+ solution over a period of 60 minutes. A multistage batch filtration process increased the Pb2+ ion removal to 50-54 ppb/3g of foam over a period of 90 minutes.
References
MacBrayer RL, Wysocki DC. Polyurethane Foams Formulation and Manufacture, Program Division, Technomic Publishing Company, Incorporated 1998; p. 347.
Braun T, Farag AB. Polyurethane foams and microspheres in analytical chemistry: Improved Liquid–Solid, Gas-Solid and Liquid-Liquid contact via a new geometry for the solid phase. Anal Chim Acta 1978; 99(1): 1-36. http://dx.doi.org/10.1016/S0003-2670(01)84497-4 DOI: https://doi.org/10.1016/S0003-2670(01)84497-4
Terlingen JGA. Introduction of functional groups at polymer surfaces by Glow discharge techniques. Europlasma Tech Paper, Ch 2.
Yeon KH, Lee JW, Lee JS, Moon SH. Preparation and characterization of cation-exchange media based on flexible polyurethane foams. J Appl Polym Sci 2002; 86: 1773-81. http://dx.doi.org/10.1002/app.11230 DOI: https://doi.org/10.1002/app.11230
Lemos VA, Santos LN, Alves AP, David GT. Chromotropic acid-functionalized polyurethane foam: A new sorbent for on-line preconcentration and determination of cobalt and nickel in lettuce samples. J Sep Sci 2006; 29(9): 1197-204. http://dx.doi.org/10.1002/jssc.200600079 DOI: https://doi.org/10.1002/jssc.200600079
Fournier D, De Geest BG, Du Prez FE. On-demand click functionalization of polyurethane films and foams. Polym J 2009; 50(23): 5362-67. http://dx.doi.org/10.1016/j.polymer.2009.09.047 DOI: https://doi.org/10.1016/j.polymer.2009.09.047
Krupadam RJ, Khan MS, Das S. Adsorption of fluoride from water by surface-functionalized polyurethane foam. Water Sci Technol 2010; 62(4): 759-65. http://dx.doi.org/10.2166/wst.2010.190 DOI: https://doi.org/10.2166/wst.2010.190
Moawed EA, Zaid MAA, El-Shahat MF. Analytical application of polyurethane foam functionalized with quinolin-8-ol for preconcentration and determination of trace metal ions in wastewater. J Anal Chem+ 2006; 61(5): 458-64. http://dx.doi.org/10.1134/S1061934806050054 DOI: https://doi.org/10.1134/S1061934806050054
Moawed EA, Zaid MAA, El-Shahat MF. Preparation, characterization and applications of polyurethane foam functionalized with resorcinol for quantitative separation and determination of silver(I) and mercury(II) from tap and wastewater. Int J Environ An Ch 2004; 84(12). DOI: https://doi.org/10.1080/0306731042000268486
Meligi GA. Removal of Some Heavy Metal Ions Using Grafted Polyurethane Foam. Polym-Plast Technol 2008; 47: 106-13. DOI: https://doi.org/10.1080/03602550701581175
Jang SH, Min BG, Jeong YG, Lyoo WS, Lee SC. Removal of lead ions in aqueous solution by hydroxyapatite/polyurethane composite foams. J Hazard Mater 2008; 152(3): 1285-92. http://dx.doi.org/10.1016/j.jhazmat.2007.08.003 DOI: https://doi.org/10.1016/j.jhazmat.2007.08.003
Sone H, Fugetsu B, Tanaka S. Selective elimination of Pb(II) ions by alginate/polyurethane composite foams. J Hazard Mater 2009; 162(1): 423-9. http://dx.doi.org/10.1016/j.jhazmat.2008.05.093 DOI: https://doi.org/10.1016/j.jhazmat.2008.05.093
Special Chem - Jul 21, 2004, Understanding Chain Extenders and Crosslinkers, http://www.specialchem4 polymers.com/resources/articles/article.aspx?id=1777 (accessed July 2013).
Szycher M. Szycher's Handbook of Polyurethanes, CRC Press 1999; p. 1126. DOI: https://doi.org/10.1201/9781482273984
Saunders G, MacCreath B. Application Note, Materials Testing and Research, Polymers, http://www.chem.agilent. com/Library/brochures/5990-7994-GPCorganics-Apr11-9lo.pdf (accessed April 2013).
Chanda M, Salil K. Roy, Plastics Technology Handbook, Third Edition, CRC Press 1998; Chapter 2.
Hansen J. Characteristic IR Absorption Frequencies of Organic Functional Groups 2006; http://www2.ups.edu/ faculty/hanson/Spectroscopy/IR/IRfrequencies.html (accessed Nov 2013).
Beauchamp P, Spectroscopy Data Tables 2010, http://www.csupomona.edu/~psbeauchamp/pdf/424_spectra_tables.pdf (accessed on Nov 2013).
Sung CSP, Schneider NS. Infrared studies of hydrogen bonding in toluene diisocyanate based polyurethanes. Macromolecules 1975; 8: 68-73. http://dx.doi.org/10.1021/ma60043a015 DOI: https://doi.org/10.1021/ma60043a015
Aneja A, Wilkes GL. On the issue of urea phase connectivity in formulations based on molded flexible polyurethane foams. J Appl Polym Sci 2002; 85: 2956-67. http://dx.doi.org/10.1002/app.10863 DOI: https://doi.org/10.1002/app.10863
Harland CE. Ion exchange: theory and practice, 2nd Ed. Royal Society of Chemistry 1994; p. 285
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Nidal Abu-Zahra, Subhashini Gunashekar
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Policy for Journals/Articles with Open Access
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are permitted and encouraged to post links to their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work
Policy for Journals / Manuscript with Paid Access
Authors who publish with this journal agree to the following terms:
- Publisher retain copyright .
- Authors are permitted and encouraged to post links to their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work .
