Mechanical Characterization of Epoxy Polymer Concrete Containing Fly Ash

Authors

  • Raman Bedi Department of Mechanical Engineering, National Institute of Technology, Jalandhar, India
  • Nagendra Kumar Gupta Department of Mechanical Engineering, National Institute of Technology, Jalandhar, India

DOI:

https://doi.org/10.6000/1929-5995.2013.02.04.3

Keywords:

Polymer concrete, Fly Ash, Mixture design of experiments, Compressive strength, flexural strength

Abstract

Polymer concrete is a composite material made of aggregates and polymeric resin as a binder. The applications of polymer concrete is limited not only to the domain of civil engineering but it has got inroads in to structural applications in Machine tool structures. Till date no standard mix design procedures are available for polymer concrete systems. In this research, Polymer concrete samples were made using epoxy resin as a binder, fly ash as a filler and marble waste as aggregate. The various mix proportions were developed using concept of mixture design of experiments. Compressive and flexural strength was evaluated for each composition of polymer concrete thus obtained. The effect of variables such as epoxy resin, fly ash and aggregates were analyzed. An optimum mix composition has been developed using the regression equations. The coefficient of correlation (R-Square) between the experimental value and predicted value was found to be high near about one proving the fitness of the model.

References

Kirlikovali E. Polymer/Concrete composites- A Review. Polym Eng Sci 1981; 21(8): 507-9. http://dx.doi.org/10.1002/pen.760210811 DOI: https://doi.org/10.1002/pen.760210811

Fowler DW. Polymers in concrete: A vision for the 21st century. Cem Concr Compos 1999; 21: 449-52. http://dx.doi.org/10.1016/S0958-9465(99)00032-3 DOI: https://doi.org/10.1016/S0958-9465(99)00032-3

Barbuta M, Lepadatu D. Mechanical characteristic investigation of polymer concrete using mixture design of experiment and response surface method. J Appl Sci 2008; 8(12): 2242-9. DOI: https://doi.org/10.3923/jas.2008.2242.2249

Harja M, Barbuta M, Rusu L. Obtaining and characterization of polymer concrete with fly ash. J Appl Sci 2009; 9(1): 88-96. http://dx.doi.org/10.3923/jas.2009.88.96 DOI: https://doi.org/10.3923/jas.2009.88.96

Vipulanandan C. Characterization of Polyester Polymer and Polymer Concrete. J Mater Civ 1993; 5(1): 62-82. http://dx.doi.org/10.1061/(ASCE)0899-1561(1993)5:1(62) DOI: https://doi.org/10.1061/(ASCE)0899-1561(1993)5:1(62)

Maksimov RD, Jirgens L, Jansons J, Plume E. Mechanical properties of polyester polymer concrete. Mech Compos Mater 1999; 35(2): 99-103. http://dx.doi.org/10.1007/BF02257239 DOI: https://doi.org/10.1007/BF02257239

El-Hawary MM, Abdel-Fatteh H. Temperature effect on the mechanical behaviour of resin concrete. Constr Build Mater 2000; 14: 317-23. http://dx.doi.org/10.1016/S0950-0618(00)00032-5 DOI: https://doi.org/10.1016/S0950-0618(00)00032-5

Gorninski JP, Dal Molin DC, Kazmierczak CS. Strength degradation of polymer concrete in acidic environments. Cem Concr Compos 2007; 29: 637-45. http://dx.doi.org/10.1016/j.cemconcomp.2007.04.001 DOI: https://doi.org/10.1016/j.cemconcomp.2007.04.001

Mahdi F, Abbas H, Khan AA. Strength characteristics of polymer mortar and concrete using different compositions of resins derived from postconsumer PET bottles. Constr Build Mater 2010; 24: 25-36. http://dx.doi.org/10.1016/j.conbuildmat.2009.08.006 DOI: https://doi.org/10.1016/j.conbuildmat.2009.08.006

Muthukumar M, Mohan D. Studies on Furan polymer concrete. J Polym Res 2005; 12: 231-41. http://dx.doi.org/10.1007/s10965-004-3206-7 DOI: https://doi.org/10.1007/s10965-004-3206-7

Muthukumar M, Mohan D. Studies on polymer concrete based on optimized aggregate mix proportion. Eur Polym J 2004; 40: 2167-77. http://dx.doi.org/10.1016/j.eurpolymj.2004.05.004 DOI: https://doi.org/10.1016/j.eurpolymj.2004.05.004

Brockenbrough TW. Fibre Reinforced methacrylate polymer concrete. ACI Mater J 1982; 322-5.

Griffiths R, Ball A. An assessment of the properties and degradation behaviour of glass-fibre-reinforced polyester polymer concrete. Compos Sci Technol 2000; 60: 2747-53. http://dx.doi.org/10.1016/S0266-3538(00)00147-0 DOI: https://doi.org/10.1016/S0266-3538(00)00147-0

Sett K, Vipulanandan C. Properties of polyester polymer concrete with glass and carbon fibers. ACI Mater J 2004; 101: 30-41. DOI: https://doi.org/10.14359/12985

Reis JML. Mechanical characterization of fiber reinforced polymer concrete. Mater Res 2005; 8(3): 357-60. http://dx.doi.org/10.1590/S1516-14392005000300023 DOI: https://doi.org/10.1590/S1516-14392005000300023

Rebeiz KS, Serhal SP, Craft AP. Properties of Polymer Concrete Using Fly Ash. J Mater Civ Eng 2004; 16: 15-9. http://dx.doi.org/10.1061/(ASCE)0899-1561(2004)16:1(15) DOI: https://doi.org/10.1061/(ASCE)0899-1561(2004)16:1(15)

Varughese KT, Chaturvedi BK. Fly ash as a fine aggregate in polyester based polymer concrete. Cem Concr Res 1995; 18: 105-8. DOI: https://doi.org/10.1016/0958-9465(95)00006-2

Montgomery DC. Design and Analysis of Experiments. 5th ed. John Wiley and Sons: New York 2001.

Downloads

Published

2013-12-31

How to Cite

Bedi, R., & Gupta, N. K. (2013). Mechanical Characterization of Epoxy Polymer Concrete Containing Fly Ash. Journal of Research Updates in Polymer Science, 2(4), 201–208. https://doi.org/10.6000/1929-5995.2013.02.04.3

Issue

Section

Articles