Hemostatic Gelatin-Alginate Hydrogels Modified with Humic Acids and Impregnated with Aminocaproic Acid
DOI:
https://doi.org/10.6000/1929-5995.2024.13.05Keywords:
Hemostasis, biopolymer hydrogel, swelling, thermo-responsivity, drug delivery, X-ray diffractometry, Fourier transform infrared spectroscopy, transmembrane transportAbstract
The work is devoted to the development of safe and biocompatible multicomponent gelatin-alginate hydrogels modified with humic acids (HA) and impregnated with the antifibrinolytic agent aminocaproic acid (АА).These hydrogels are designed to be effective hemostatic materials with anti-inflammatory properties and the ability to deliver in less than 30 seconds to deep and hidden areas of hemorrhages. Studies of the crystal structure by X-ray diffraction analysis and non-covalent interactions of molecules by Fourier transform infrared spectroscopy of the developed hemostatic gelatin-alginate hydrogels modified with bactericidal and anti-inflammatory humic acids made it possible to identify the optimal concentrations of HA from 2.5 wt.%. up to 5 wt.%. At such concentrations of HA, gelatin-alginate hydrogels have a semicrystalline structure. Due to non-covalent bonds between polymer chains, they are thermo-responsive with a gel-sol transition temperature of about 37 °C. Impregnation of these hydrogels with aminocaproic acid led to an almost threefold increase in their swelling, which facilitated the dissolution of AA in the hydrogels and its subsequent delivery to the wound. Experiments simulating the transmembrane transport of aminocaproic acid from the developed gelatin-alginate hydrogels confirmed their ability to rapidly deliver up to 494± 3 mg of AA from 5 ml of hydrogel to the wound.
References
Chen X-J, Lei Z-Y, Liu P, et al. An aminocaproic acid-grafted chitosan derivative with superior antibacterial and hemostatic properties for the prevention of secondary bleeding. Carbohydrate Polymers 2023; 316: 120988-11. https://doi.org/10.1016/j.carbpol.2023.120988 DOI: https://doi.org/10.1016/j.carbpol.2023.120988
Li Q, Hu E, Yu K, et al. Self-propelling Janus particles for hemostasis in perforating and irregular wounds with massive hemorrhage. Adv. Funct. Mater 2020; 30(42): 2004153-13. https://doi.org/10.1002/adfm.202004153 DOI: https://doi.org/10.1002/adfm.202004153
Zhong Y, Hu H, Min N, et al. Application and outlook of topical hemostatic materials: A narrative review. Ann Transl Med 2021; 9(7): 577-20. https://doi.org/10.21037/atm-20-7160 DOI: https://doi.org/10.21037/atm-20-7160
Jiao S, Zhang X, Cai H, et al. Recent advances in biomimetic hemostatic materials. Materials Today Bio 2023; 19: 100592-22. https://doi.org/10.1016/j.mtbio.2023.100592 DOI: https://doi.org/10.1016/j.mtbio.2023.100592
Yang X, Wang X, Gao X, et al. What else should hemostatic materials do beyond hemostasis: A review. Materials Today Bio 2024; 25: 101008-18. https://doi.org/10.1016/j.mtbio.2024.101008 DOI: https://doi.org/10.1016/j.mtbio.2024.101008
Ghimire S, Sarkar P, Rigby K, et al. Polymeric materials for hemostatic wound healing. Pharmaceutics 2021; 13: 2127-27. https://doi.org/10.3390/pharmaceutics13122127 DOI: https://doi.org/10.3390/pharmaceutics13122127
Yu P, Zhong W. Hemostatic materials in wound care. Burns & Trauma 2021: 9; tkab019-17. https://doi.org/10.1093/burnst/tkab019 DOI: https://doi.org/10.1093/burnst/tkab019
Peng X, Xu X, Deng Y, et al. Ultrafast self‐gelling and wet adhesive powder for acute hemostasis and wound healing. Adv. Funct. Mater 2021; 31(33): 2102583-13. https://doi.org/10.1002/adfm.202102583 DOI: https://doi.org/10.1002/adfm.202102583
Xie Y, Gao P, He F et al.Application of alginate-based hydrogels in hemostasis Gels 2022; 8: 109-21. https://doi.org/10.3390/gels8020109 DOI: https://doi.org/10.3390/gels8020109
Fatimi A. Cellulose-Based Hydrogels: Patent Analysis. Journal of Research Updates in Polymer Science 2022; 11: 16–24. https://doi.org/10.6000/1929-5995.2022.11.03 DOI: https://doi.org/10.6000/1929-5995.2022.11.03
Karim MM, Lasker T, et al. Low-Cost Production of Chitosan Biopolymer from Seafood Waste: Extraction and Physiochemical Characterization. Journal of Research Updates in Polymer Science 2024; 13: 17–26. https://doi.org/10.6000/1929-5995.2024.13.03 DOI: https://doi.org/10.6000/1929-5995.2024.13.03
Du Y, Li L, Peng H, et al. A spray-filming self-healing hydrogel fabricated from modified sodium alginate and gelatin as a bacterial barrier. Macromol. Biosci 2020; 20: 1900303-11. https://doi.org/10.1002/mabi.201900303 DOI: https://doi.org/10.1002/mabi.201900303
Xi G, Liu W, Chen M, et al. Polysaccharide-based lotus seedpod surface-like porous microsphere with precise and controllable micromorphology for ultrarapid hemostasis. ACS Appl. Mater. Interfaces 2019; 11: 46558−46571. https://doi.org/10.1021/acsami.9b17543 DOI: https://doi.org/10.1021/acsami.9b17543
Mecwan M, Li J, Falcone N, et al. Recent advances in biopolymer-based hemostatic materials. Regenerative Biomaterials 2022; 9: rbac063-26. https://doi.org/10.1093/rb/rbac063 DOI: https://doi.org/10.1093/rb/rbac063
Venezia V, Avallone PR, Vitiello G, et al. Adding humic acids to gelatin hydrogels: a way to tune gelation. Biomacromolecule 2022; 23(1): 443–453. https://doi.org/10.1021/acs.biomac.1c01398 DOI: https://doi.org/10.1021/acs.biomac.1c01398
Zeigler ZR. Effects of epsilon aminocaproic acid on primary hemostasis. Haemostasis 1991; 21(5): 313–320. https://doi.org/10.1159/000216242 DOI: https://doi.org/10.1159/000216242
Heidmann P, Tornquist SJ, Qu A, et al. Laboratory measures of hemostasis and fibrinolysis after intravenous administration of -aminocaproic acid in clinically normal horses and ponies. AJVR 2005; 66(2): 313–318. https://doi.org/10.2460/ajvr.2005.66.313 DOI: https://doi.org/10.2460/ajvr.2005.66.313
Wilson JM, Bower LK, Fackler JC, Beals DA, Bergus BO, Kevy SV. Aminocaproic acid decreases the incidence of intracranial hemorrhage and other hemorrhagic complications of ECMO. Journal of Pediatric Surgery 1993; 28(4): 536–540. https://doi.org/10.1016/0022-3468(93)90612-O DOI: https://doi.org/10.1016/0022-3468(93)90612-O
Lebedev V, Miroshnichenko D, Tykhomyrova T, et al. Design and research of environmentally friendly polymeric materials modificated by derivatives of coal. Petroleum and Coal 2023; 65(2): 334-340. https://doi.org/10.1063/5.0119925 DOI: https://doi.org/10.1063/5.0119925
Lebedev V, Miroshnichenko D, Vytrykush N, et al. Novel biodegradable polymers modified by humic acids. Materials Chemistry and Physics 2024; 313: 128778. https://doi.org/10.1016/j.matchemphys.2023.128778 DOI: https://doi.org/10.1016/j.matchemphys.2023.128778
Lebedeva KO, Cherkashina AM, Tykhomyrova TS, et al. Design and researching of biologically active polymeric hydrogel transdermal materials modified by humic acid. IOP Conference Series: Earth and Environmental Science 2023; 1254(1): 012009. https://doi.org/10.1088/1755-1315/1254/1/012009 DOI: https://doi.org/10.1088/1755-1315/1254/1/012009
Lebedeva K, Cherkashina A, Voronkin A, et al. Design and researching smart biologically active polymeric hydrogel transdermal nanomaterial’s. 2023 IEEE 4th KhPI Week on Advanced Technology (KhPIWeek) 2023: 1–5. https://doi.org/10.1109/KhPIWeek61412.2023.10312985 DOI: https://doi.org/10.1109/KhPIWeek61412.2023.10312985
Lebedeva K, Cherkashina А, Masikevych YG, et al. Modeling of Smart Bio-Medical Active Polymeric Hydrogel Transdermal Materials. Journal of Engineering Sciences 2024; 11(1): C1 - C7. https://doi.org/10.21272/jes.2024.11(1).c1 DOI: https://doi.org/10.21272/jes.2024.11(1).c1
Miroshnichenko D, Lebedeva K, Cherkashina A, et al. Study of hybrid modification with humic acids of environmentally safe biodegradable hydrogel films based on hydroxypropyl methylcellulose. C- Journal of carbon research 2022; 8: 71–10. https://doi.org/10.3390/c8040071 DOI: https://doi.org/10.3390/c8040071
Perkasa DP, Erizal E, Purwanti T, et al. Characterization of semi-interpenetrated network alginate/gelatin wound dressing crosslinked at sol phase. Indonesian Journal of Chemistry 2018; 18(2): 367–375. https://doi.org/10.22146/ijc.25710 DOI: https://doi.org/10.22146/ijc.25710
Uttayarat P, Chiangnoon R, Eamsiri J, et al. Processing and characterization of antibacterial hydrogel sheet dressings composed of poly(vinyl alcohol) and silk fibroin for wound healing application. Walailak J Sci & Tech 2019; 16(5): 349-359. https://doi.org/10.48048/wjst.2019.6292 DOI: https://doi.org/10.48048/wjst.2019.6292
Klochko NP, Barbash VA, Petrushenko SI, et al. Thermoelectric textile devices with thin films of nanocellulose and copper iodide. Journal of Materials Science: Materials in Electronics 2021; 32: 23246–23265. https://doi.org/10.1007/s10854-021-06810-9 DOI: https://doi.org/10.1007/s10854-021-06810-9
Lan L, Ping J, Xiong J, et al. Sustainable natural bio-origin materials for future flexible devices. Adv. Sci. 2022; 9(15): 2200560–34. https://doi.org/10.1002/advs.202200560 DOI: https://doi.org/10.1002/advs.202200560
Sundarrajan P, Eswaran P, Marimuthu A, et al. One pot synthesis and characterization of alginate stabilized semiconductor nanoparticles”. Bull. Korean Chem. Soc. 2012; 33(10): 3218–3224. https://doi.org/10.5012/bkcs.2012.33.10.3218 DOI: https://doi.org/10.5012/bkcs.2012.33.10.3218
Ghosh D, Pramanik A, Sikdar N, et al. Synthesis of low molecular weight alginic acid nanoparticles through persulfate treatment as effective drug delivery system to manage drug resistant bacteria”, BiotechnolBioproc E 2011; 16: pp. 383-392. https://doi.org/10.1007/s12257-010-0099-7 DOI: https://doi.org/10.1007/s12257-010-0099-7
Bhagyaraj S, Krupa I. Alginate-mediated synthesis of hetero-shaped silver nanoparticles and their hydrogen peroxide sensing ability. Molecules 2020; 25: 435-10. https://doi.org/10.3390/molecules25030435 DOI: https://doi.org/10.3390/molecules25030435
Radev L, Fernandes M, Salvado I, et al. Organic/inorganic bioactive materials Part III: in vitro bioactivity of gelatin/silicocarnotite hybrids. Open Chemistry 2009; 7(4): 721-730. https://doi.org/10.2478/s11532-009-0078-z DOI: https://doi.org/10.2478/s11532-009-0078-z
Wang K, Wang W, Ye R, et al. Mechanical and barrier properties of maize starch-gelatin composite films: effects of amylose content. J Sci Food Agric. 2017; 97(11): 3613-3622. https://doi.org/10.1002/jsfa.8220 DOI: https://doi.org/10.1002/jsfa.8220
Koesnarpadi S, Santosa SJ, Siswanta D, et al. Synthesis and characterization of magnetite nanoparticle coated humic acid (Fe3O4/HA). Procedia Environmental Sciences 2015; 30: 103 – 108. https://doi.org/10.1016/j.proenv.2015.10.018 DOI: https://doi.org/10.1016/j.proenv.2015.10.018
Derkach SR, Voron’ko NG, Sokolan NI, et al. Interactions between gelatin and sodium alginate: UV and FTIR studies. Journal of Dispersion Science and Technology 2019; 5: 690-698. https://doi.org/10.1080/01932691.2019.1611437 DOI: https://doi.org/10.1080/01932691.2019.1611437
Galante R, Pinto TJA, Colaço R, et al. Sterilization of hydrogels for biomedical applications: A review. J Biomed Mater Res Part B 2018; 106(6): 2472-2492. https://doi.org/10.1002/jbm.b.34048 DOI: https://doi.org/10.1002/jbm.b.34048
Stoppel WL, White JC, Horava SD, et al. Terminal sterilization of alginate hydrogels: Efficacy and impact on mechanical properties. J Biomed Mater Res Part B 2014; 102Ba: 877–884. https://doi.org/10.1002/jbm.b.33070 DOI: https://doi.org/10.1002/jbm.b.33070
Zhang F, Scull G, Gluck JM, et al. Effects of sterilization methods on gelatin methacryloyl hydrogel properties and macrophage gene expression in vitro. Biomed Mater. 2022; 18(1): 10-27. https://doi.org/10.1088/1748-605X/aca4b2 DOI: https://doi.org/10.1088/1748-605X/aca4b2
Carranza T, Zalba- Balda M, BarriolaBaraibar MJ, et al. Effect of sterilization processes on alginate/gelatin inks for three-dimensional printing. Int J Bioprint, 2023; 9(1): 309-319. https://doi.org/10.18063/ijb.v9i1.645 DOI: https://doi.org/10.18063/ijb.v9i1.645
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Policy for Journals/Articles with Open Access
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are permitted and encouraged to post links to their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work
Policy for Journals / Manuscript with Paid Access
Authors who publish with this journal agree to the following terms:
- Publisher retain copyright .
- Authors are permitted and encouraged to post links to their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work .