Itaconic Acid-Based Hydrogels with Flame Retardancy and High-Temperature Resistance via Vat Photopolymerization 3D Printing
DOI:
https://doi.org/10.6000/1929-5995.2024.13.13Keywords:
Hydrogels, Itaconic acid, Flame retardancy, High-temperature resistance, 3D printing, Vat photopolymerizationAbstract
Biomass-based hydrogels have received extensive attention due to their flame retardant properties and environmental friendliness. The dilemma that non-renewable energy resources are increasingly depleted, leads us to place high expectations on renewable natural clean energy, as well as to conduct in-depth research on the efficient utilization and green preparation processes for the clean energy. In this study, we introduce a green and sustainable method for the design and preparation of flame-retardant materials by integrating two new class of itaconic acid-based hydrogels in conjunction with the rapid vat photopolymerization (VP) 3D printing technology. The hydrogels prepared by this method exhibit exceptional flame retardancy, mechanical robustness and superior high-temperature resistance. This research provides novel strategies and essential guidance for the green synthesis and sustainable development of next-generation flame retardant materials.
References
Zhang HQ, Liu ZJ, Mai JP, Wang N, Liu HJ, Zhong J, Mai X. M. A smart design strategy for super-elastic hydrogel with long-term moisture, extreme temperature resistance, and non-flammability. Adv Sci 2021; 8: 2100320. https://doi.org/10.1002/advs.202100320 DOI: https://doi.org/10.1002/advs.202100320
Yang HB, Liu ZX, Chen H, Yue X, Ling ZC, Han ZM, Yin CH, Ruan YH, Zhao X, Zhou Z, Li DH, Xie S, Yang KP, Guan QF, Yu, SH. An all-natural fire-resistant bioinspired cellulose-based structural material by external force-induced assembly. Mater. Today Nano 2023; 23: 100342. https://doi.org/10.1016/j.mtnano.2023.100342 DOI: https://doi.org/10.1016/j.mtnano.2023.100342
Li YS, Hu XM, Cheng WM, Shao ZA, Xue D, Zhao YY, Lu W. A novel hightoughness, organic/inorganic double-network fire retardant gel for coal-seam with high ground temperature. Fuel 2020; 263: 116779. https://doi.org/10.1016/j.fuel.2019.116779 DOI: https://doi.org/10.1016/j.fuel.2019.116779
Zuo XL, Zhou Y, Hao KA, Liu C, Yu RH, Huang AR, Wu C, Yang YY. 3D printed all-natural hydrogels: Flame-retardant materials toward attaining green sustainability. Adv Sci 2024; 11: 2306360. https://doi.org/10.1002/advs.202306360 DOI: https://doi.org/10.1002/advs.202306360
Cui XF, Zheng WJ, Zou W, Liu XY, Yang H, Yan J, Gao Y. Water-retaining, tough and self-healing hydrogels and their uses as fire-resistant materials. Polym Chem 2019; 10: 5151-5158. https://doi.org/10.1039/C9PY01015G DOI: https://doi.org/10.1039/C9PY01015G
Wang YY, Liang ZC, Su ZP, Zhang K, Ren JL, Sun RC, Wang XH. All-biomass fluorescent hydrogels based on biomass carbon dots and alginate/nanocellulose for biosensing. ACS Appl Bio Mater 2018; 1: 1398-1407. https://doi.org/10.1021/acsabm.8b00348 DOI: https://doi.org/10.1021/acsabm.8b00348
Liu Y, Zhang AS, Cheng YM, Li MH, Cui YC, Li ZW. Recent advances in biomass phytic acid flame retardants. Polym Test 2023; 124: 108100. https://doi.org/10.1016/j.polymertesting.2023.108100 DOI: https://doi.org/10.1016/j.polymertesting.2023.108100
Raj T, Chandrasekhar K, Naresh Kumar A, Kim S-H. Lignocellulosic biomass as renewable feedstock for biodegradable and recyclable plastics production: A sustainable approach. Renew Sust Energ Rev 2022; 158: 112130. https://doi.org/10.1016/j.rser.2022.112130 DOI: https://doi.org/10.1016/j.rser.2022.112130
Zhao ML, Lu XY, Zong H, Li JY, Zhuge B. Itaconic acid production in microorganisms. Biotechnol Lett 2018; 40: 455-464. https://doi.org/10.1007/s10529-017-2500-5 DOI: https://doi.org/10.1007/s10529-017-2500-5
Magalhães AI, Carvalho JC, Thoms JF, Silva RS, Soccol CR. Second-generation itaconic acid: An alternative product for biorefineries? Bioresource Technol 2020; 308: 123319. https://doi.org/10.1016/j.biortech.2020.123319 DOI: https://doi.org/10.1016/j.biortech.2020.123319
Tomishige K, Yabushita M, Cao J, Nakagawa Y. Hydrodeoxygenation of potential platform chemicals derived from biomass to fuels and chemicals. Green Chemistry 2022; 24: 5652-5690. https://doi.org/10.1039/D2GC01289H DOI: https://doi.org/10.1039/D2GC01289H
Wang D, Wang Y, Li T, Zhang SW, Ma PM, Shi DJ, Chen MQ, Dong WF. A bio-based flame-retardant starch based on phytic acid. ACS Sustainable Chem Eng 2020; 8: 10265. https://doi.org/10.1021/acssuschemeng.0c03277 DOI: https://doi.org/10.1021/acssuschemeng.0c03277
Zhao XJ, Liang ZW, Huang YB, Hai Y, Zhong XD, Xiao S, Jiang SH. Influence of phytic acid on flame retardancy and adhesion performance enhancement of poly (vinyl alcohol) hydrogel coating to wood substrate. Prog Org Coat 2021; 16: 106453. https://doi.org/10.1016/j.porgcoat.2021.106453 DOI: https://doi.org/10.1016/j.porgcoat.2021.106453
Xue Y, Yang F, Li JY, Zuo XH, Pan BL, Li MK, Quinto L, Mehta J, Stiefel L, Kimmey C, Eshed Y, Zussman E, Simon M, Rafailovich M. Synthesis of an effective flame-retardant hydrogel for skin protection using xanthan gum and resorcinol bis(diphenyl phosphate)-coated starch. Biomacromolecules 2021; 22: 4535-4543. https://doi.org/10.1021/acs.biomac.1c00804 DOI: https://doi.org/10.1021/acs.biomac.1c00804
Zuo XL, Wu C, Yang L, Huang AR, Dong ZG, Wang TF, Xu F, Zhang DH, Guo JB, Yang YY. Fluorescent brighteners in thiol-acrylate polymerizations: Sunlight-cured coatings and LED-assisted multifuctional intelligent nanoparticles synthesis. Prog Org Coat 2020; 148: 105829. https://doi.org/10.1016/j.porgcoat.2020.105829 DOI: https://doi.org/10.1016/j.porgcoat.2020.105829
Zuo XL, Wang SF, Zheng K, Wu C, Zhang DH, Dong ZG, Wang TF, Xu F, Guo JB, Yang YY. Fluorescent-brightener-mediated thiol-ene reactions under visible-light LED: A green and facile synthesis route to hyperbranched polymers and stimuli-sensitive nanoemulsions. Dyes Pigments 2021; 189: 109253. https://doi.org/10.1016/j.dyepig.2021.109253 DOI: https://doi.org/10.1016/j.dyepig.2021.109253
Abu-Abdoun II, Aale-Ali AA. Synthesis and applications of onium salts for photopolymerization reactions. Journal of Research Updates in Polymer Science 2024; 13: 27-33. https://doi.org/10.6000/1929-5995.2024.13.04 DOI: https://doi.org/10.6000/1929-5995.2024.13.04
Zuo XL, Wang SF, Zhou Y, Wu C, Huang AR, Wang TF, Yang YY. Fluorescent hydrogel actuators with simultaneous morphing- and color/brightness-changes enabled by light-activated 3D printing. Chem Eng J 2022; 447: 137492. https://doi.org/10.1016/j.cej.2022.137492 DOI: https://doi.org/10.1016/j.cej.2022.137492
Zhou Y, Hao KA, Liu C, Yu RH, Huang AR, Wu C, Yang YY, Zuo XL. 3D printed hydrogels with time/temperature-dependent photoluminescence for multi-information dynamic display. ACS Appl Polym Mater 2024; 6: 2012-2021. https://doi.org/10.1021/acsapm.3c02863 DOI: https://doi.org/10.1021/acsapm.3c02863
Vahabi H, Gholami F, Tomas M, Movahedifar E, Yazdi MK, Saeb MR. Hydrogel and aerogel‐based flame‐retardant polymeric materials: A review. Journal of Vinyl and Additive Technology 2024; 30: 5-25. https://doi.org/10.1002/vnl.22041 DOI: https://doi.org/10.1002/vnl.22041
Xenikakis I, Tsongas K, Tzimtzimis EK, Zacharis CK, Theodoroula N, Kalogianni EP, Demiri E, Vizirianakis IS, Tzetzis D, Fatouros DG. Fabrication of hollow microneedles using liquid crystal display (LCD) vat polymerization 3D printing technology for transdermal macromolecular delivery. Int J Pharmaceut 2021; 597: 120303. https://doi.org/10.1016/j.ijpharm.2021.120303 DOI: https://doi.org/10.1016/j.ijpharm.2021.120303
Pawar AA, Saada G, Cooperstein I, Larush L, Jackman JA, Tabaei SR, Cho N-J, Magdassi S. High-performance 3D printing of hydrogels by water-dispersible photoinitiator nanoparticles. Sci Adv 2016; 2: e1501381. https://doi.org/10.1126/sciadv.1501381 DOI: https://doi.org/10.1126/sciadv.1501381
Zuo XL, Zhang KZ, Lei Y, Qin SH, Hao Z, Guo JB. Influence of thermooxidative aging on the static and dynamic mechanical properties of long-glass-fiber-reinforced polyamide 6 composites. J Appl Polym Sci 2014; 131: 39594. https://doi.org/10.1002/app.39594 DOI: https://doi.org/10.1002/app.39594
Zuo XL, Song HS, Shao HJ, Aud MH, Wei T, Guo JB. Effects of OMMT on the aging behaviors of halogen-antimony flameretarded LGFPA6 composites: Flammability and thermal degradation. Thermochim Acta 2017; 653: 32-42. https://doi.org/10.1016/j.tca.2017.04.001 DOI: https://doi.org/10.1016/j.tca.2017.04.001
Zuo XL, Shao HJ, Zhang DH, Hao Z, Guo JB. Effects of thermal-oxidative aging on the flammability and thermaloxidative degradation kinetics of tris(tribromophenyl) cyanurate flame retardant PA6/LGF composites. Polym Degrad Stabil 2013; 98: 2774-2783. https://doi.org/10.1016/j.polymdegradstab.2013.10.014 DOI: https://doi.org/10.1016/j.polymdegradstab.2013.10.014
Liu JR, Yu ZC, He HL, Wang YS, Zhao YH. A novel flame-retardant composite material based on calcium alginate/poly (vinyl alcohol)/graphite hydrogel: thermal kinetics, combustion behavior and thermal insulation performance. Cellulose 2021; 28: 8751-8769. https://doi.org/10.1007/s10570-021-04047-7 DOI: https://doi.org/10.1007/s10570-021-04047-7
Ligon SC, Husar B, Wutzel H, Holman R, Liska R. Strategies to reduce oxygen inhibition in photoinduced polymerization. Chem Rev 2014; 114: 557-589. https://doi.org/10.1021/cr3005197 DOI: https://doi.org/10.1021/cr3005197
Xu YJ, Qu LY, Liu Y, Zhu P. An overview of alginates as flame-retardant materials: Pyrolysis behaviors, flame retardancy, and applications. Carbohyd Polym 2021; 260: 117827. https://doi.org/10.1016/j.carbpol.2021.117827 DOI: https://doi.org/10.1016/j.carbpol.2021.117827
Tang WF, Liang GQ, Wang L, Yuan Y, Dessie W, Liu F, Qin ZD, Wang Y, Xiao AG, Jin XD. Multi-functional flame retardant coatings comprising chitosan/ gelatin and sodium phytate for rigid polyurethane foams. J Clean Prod 2023; 394: 136371. https://doi.org/10.1016/j.jclepro.2023.136371 DOI: https://doi.org/10.1016/j.jclepro.2023.136371
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Policy for Journals/Articles with Open Access
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are permitted and encouraged to post links to their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work
Policy for Journals / Manuscript with Paid Access
Authors who publish with this journal agree to the following terms:
- Publisher retain copyright .
- Authors are permitted and encouraged to post links to their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work .