Effect of Mixing Methods and Black Conductive Fillers on Properties of Natural Rubber Composites
DOI:
https://doi.org/10.6000/1929-5995.2024.13.19Keywords:
Mixing, conductive fillers, natural rubber composites, cure characteristic, stress-strain properties, volume resistivityAbstract
Carbon black, graphite, carbon nanofibers, carbon nanotubes, and metal fillers increase composite conductivity in natural rubber, which is electrically insulating. Depending on dispersion, conductive filler lowers insulating material resistivity. These materials are frequently used for electromagnetic/radio frequency interference (EMI/RFI) shielding, conductive flexible seals gaskets, and conductive mats used to prevent electrostatic damage to electronic devices. These elastomers could be used to make flexible solar cells or mechanical-to-electricity devices. Temperature, mixing time, shear rate, and cross-linking during vulcanization affect rubber electrical conductivity of composite. To study shear rate effects, vulcanizate of Natural Rubber-based composites filled with carbon black, millable carbon fiber powder, and synthetic graphite powder was prepared by open mixing (two roll mill) and close mixing (internal mixer). We compared how shear rate affects cure, stress-strain, and volume resistivity of conductive filler-based Natural Rubber composites. Increment in clearance of two roll mill during addition of rubber additives along with rubber of reduced the shearing force resulted in less dispersive and distributive mixing and stagnant points due to band formation on roll surface compared to intermix where compound movement had no stagnation point and long wings pushed material axially and two nogs pushed material in other chamber. Compared to two roll mill samples, the compound reached every point of the mixing chamber for best homogeneity, reducing cure time and improving stress-strain and volume resistivity.
References
Gulrez SKH, et al. A review on electrically conductive polypropylene and polyethylene. Polym Compos 2014; 35(5): 900-914. https://doi.org/10.1002/pc.22734 DOI: https://doi.org/10.1002/pc.22734
Sau K. Conductive Rubber Composites Filled with Short Carbon Fibre and Their Application in Electromagnet. International Journal for Research in Engineering Application & Management (IJREAM) 05(02): 721-728.
Pang H, Xu L, Yan DX, Li ZM. Conductive polymer composites with segregated structures. Prog Polym Sci 2014; 39(11): 1908-1933. https://doi.org/10.1016/j.progpolymsci.2014.07.007 DOI: https://doi.org/10.1016/j.progpolymsci.2014.07.007
Huang Y, et al. Conductive Polymer Composites from Renewable Resources: An Overview of Preparation, Properties, and Applications. Polymers (Basel) 2019; 11(2). https://doi.org/10.3390/polym11020187 DOI: https://doi.org/10.3390/polym11020187
Suherman H, Suardi A. Enhance the electrical conductivity and tensile strength of conductive polymer composites using hybrid conductive filler.
Kampioti K, et al. Highly Conducting, Sustainable, Nanographitic Rubber Composites. ACS Omega 2018; 3(2): 1367-1373. https://doi.org/10.1021/acsomega.7b01848 DOI: https://doi.org/10.1021/acsomega.7b01848
Fan Y, Fowler GD, Zhao M. The past, present and future of carbon black as a rubber reinforcing filler - A Review Elsevier B.V. 2020; 247. https://doi.org/10.1016/j.jclepro.2019.119115 DOI: https://doi.org/10.1016/j.jclepro.2019.119115
Farida E, Bukit N, Ginting EM, Bukit BF. The effect of carbon black composition in natural rubber compound. Case Studies in Thermal Engineering 2019; 16: 100566. https://doi.org/10.1016/j.csite.2019.100566 DOI: https://doi.org/10.1016/j.csite.2019.100566
Li Y, Zhu P, Zhang Q, Chen B, Zhu Z. Study on the Properties of Rubber with Different Contents of Carbon Black. IOP Conf Ser Mater Sci Eng 2019; 677(2). https://doi.org/10.1088/1757-899X/677/2/022043 DOI: https://doi.org/10.1088/1757-899X/677/2/022043
Kyei-Manu WA, Herd CR, Chowdhury M, Busfield JJC, Tunnicliffe LB. The Influence of Colloidal Properties of Carbon Black on Static and Dynamic Mechanical Properties of Natural Rubber. Polymers (Basel) 2022; 14(6): 1-19. https://doi.org/10.3390/polym14061194 DOI: https://doi.org/10.3390/polym14061194
Hirayama D, Scuracchio CH, Saron C. Microwaves Devulcanization of SBR Containing Carbon Black. Journal of Research Updates in Polymer Science 2016; 5(2): 52-59. https://doi.org/10.6000/1929-5995.2016.05.02.1 DOI: https://doi.org/10.6000/1929-5995.2016.05.02.1
Visakh PM, Mathew AP, Thomas S. Natural polymers: Their blends, composites and nanocomposites: State of art, new challenges and opportunities 2013; 18. https://doi.org/10.1007/978-3-642-20940-6_1 DOI: https://doi.org/10.1007/978-3-642-20940-6_1
Sancaktar E, Basan S. Comparison of Electrical Conductivity in Compounds of Carbon Black With Natural and Butadiene Rubbers. Front Mater 2019; 6. https://doi.org/10.3389/fmats.2019.00265 DOI: https://doi.org/10.3389/fmats.2019.00265
Job AE, Oliveira FA, Alves N, Giacometti JA, Mattoso LHC. Conductive composites of natural rubber and carbon black for pressure sensors. Synth Met 2003; 135-136: 99-100. https://doi.org/10.1016/S0379-6779(02)00866-4 DOI: https://doi.org/10.1016/S0379-6779(02)00866-4
Szadkowski B, Marzec A, Zaborski M. Effect of different carbon fillers on the properties of nitrile rubber composites. Compos Interfaces 2019; 26(8): 729-750. https://doi.org/10.1080/09276440.2018.1534474 DOI: https://doi.org/10.1080/09276440.2018.1534474
ASTM International. Standard Test Method for Rubber Property — Vulcanization Using Oscillating Disk Cure. Annual Book of ASTM Standards 2012; 95(C): 1-11.
Relax S, Oscillating U, Cure D, Rotorless U, Meters C, Ovens V. Standard Practice for Rubber — Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized 2007; i: 1-8. https://doi.org/10.1520/D3182-21A.2
American Society for Testing and Materials. ASTM D2240-15 Standard Test Methods for Rubber Property-Durometer Hardness. Annual Book of ASTM Standards 2015; 1-13. https://doi.org/10.1520/D2240-15.2
Manufacturing CB, Specimens CR, Determina T. Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers 2009; pp. 1-14.
Jabber Braihi A, Ahmed JK, Khadim BJ, Hameed NH. Effect of Graphite on the Properties of Natural Rubber Auda jabber Braihi. Journal of Babylon University/Engineering Sciences 2016; 24(3): 617-624. [Online]. Available: https://www.mendeley.com/research-papers/454b54d6-0be4-3d3a-bf6a-4f92160cdceb/
ASTM. D257-14 Standard Test Methods for DC Resistance or Conductance of Insulating Materials 1. Standardi (C): 2012; 1-18. https://doi.org/10.1520/D0257-07 DOI: https://doi.org/10.1520/D0257-07
Kasim H, Yazici M. Electrical properties of graphene/natural rubber nanocomposites coated nylon 6.6 fabric under cyclic loading. Periodica Polytechnica Chemical Engineering 2019; 63(1): 160-169. https://doi.org/10.3311/PPch.12122 DOI: https://doi.org/10.3311/PPch.12122
Cataldo F. Study on the reinforcing effect of milled carbon fibers in a natural rubber based composite. Journal of Macromolecular Science, Part B: Physics 2008; 47(4): 818-828. https://doi.org/10.1080/00222340802122798 DOI: https://doi.org/10.1080/00222340802122798
Mohd Radzuan NA, Yusuf Zakaria M, Sulong AB, Sahari J. The effect of milled carbon fibre filler on electrical conductivity in highly conductive polymer composites. Compos B Eng 2017; 110: 153-160. https://doi.org/10.1016/j.compositesb.2016.11.021 DOI: https://doi.org/10.1016/j.compositesb.2016.11.021
Subhan Salaeh PC, Boiteux G, Nakason C. Conductive Elastomer Composites With Low Percolation Threshold Based on Carbon Black and Epoxidized Natural Rubber. Subhan Salaeh, Gise`le Boiteux, Philippe Cassagnau, Charoen Nakason, 2016. https://doi.org/10.1002/pc.24136 DOI: https://doi.org/10.1002/pc.24136
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Policy for Journals/Articles with Open Access
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are permitted and encouraged to post links to their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work
Policy for Journals / Manuscript with Paid Access
Authors who publish with this journal agree to the following terms:
- Publisher retain copyright .
- Authors are permitted and encouraged to post links to their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work .