Design Approaches to Improve Organic Solar Cells
DOI:
https://doi.org/10.6000/1929-6002.2014.03.02.4Keywords:
Organic solar cell, Nanostructure material, OSC performance, OSC efficiency, OSC improvement.Abstract
Organic solar cells (OSC)s are valuable economical and environmental friendly devices capable to generate electricity from sunlight. This is because of their simple fabrication process and minimal material usage in comparison to the inorganic solar cells. OSCs have not been widely commercialized yet because of their relatively low power conversion efficiency and stability problem. It is expected that these obstacles will be surmounted in a foreseeable future upon rigorous research studies performed in the field. This paper is devoted to reviewing the design related strategies that can be taken to enhance OSC performance. These strategies can be accomplished through modulating the architecture of the devices and by considering the alignment of the molecular energy levels between their active layer components.References
Durisch W, Tille D, Wörz A, Plapp W. Characterisation of photovoltaic generators. Applied Energy 2000; 65(1-4): 273-84.
http://dx.doi.org/10.1016/S0306-2619(99)00115-4
Gibson TL, Kelly NA. Solar photovoltaic charging of lithium-ion batteries. Journal of Power Sources 2010; 195(12): [1] Durisch W, Tille D, Wörz A, Plapp W. Characterisation of photovoltaic generators. Applied Energy 2000; 65(1-4): 273-84. http://dx.doi.org/10.1016/S0306-2619(99)00115-4 DOI: https://doi.org/10.1016/S0306-2619(99)00115-4
Gibson TL, Kelly NA. Solar photovoltaic charging of lithium-ion batteries. Journal of Power Sources 2010; 195(12): 3928-32. http://dx.doi.org/10.1016/j.jpowsour.2009.12.082 DOI: https://doi.org/10.1016/j.jpowsour.2009.12.082
Kalogirou SA. Solar Energy Engineering, Processes and Systems. First ed. London WC1X 8RR, UK: Elsevier Inc.; 2009.
Foster R, Ghassemi M, Cota A. Energy and the Environment. Ghassemi A, editor. Boca Raton, FL 33487-2742: Taylor and Francis Group, LLC; 2010.
Skompska M. Hybrid conjugated polymer/semiconductor photovoltaic cells. Synthetic Metals 2010; 160(1-2): 1-15. http://dx.doi.org/10.1016/j.synthmet.2009.10.031 DOI: https://doi.org/10.1016/j.synthmet.2009.10.031
Fthenakis VM, Kim HC. Photovoltaics: Life-cycle analyses. Solar Energy 2011; 85(8): 1609-28. http://dx.doi.org/10.1016/j.solener.2009.10.002 DOI: https://doi.org/10.1016/j.solener.2009.10.002
Jia Y, Yang L, Qin W, Yin S, Zhang F, Wei J. Efficient polymer bulk heterojunction solar cells with cesium acetate as the cathode interfacial layer. Renewable Energy 2013; 50(0): 565-9. http://dx.doi.org/10.1016/j.renene.2012.07.012 DOI: https://doi.org/10.1016/j.renene.2012.07.012
Sharma GD, Saxena D, Sangodkar SG, Roy MS. Study of some organic polymeric materials for electrical and optoelectrical devices. Indian Journal of Engineering & Materials Science 2000; 7: 278-81.
Kumar H, Kumar P, Chaudhary N, Bhardwaj R, Sharma GD, Venkatesu P, et al. Temperature effect on the performance of phthalocyanine based photovoltaic devices. Indian Journal of Engineering & Materials Science 2010; 17: 358-62.
Nurfazliana MF, Kamaruddin SA, Alias MS, Nafarizal N, Saim H, Sahdan MZ. Zinc Oxide Nanostructures for Efficient Energy Conversion in Organic Solar Cell. Journal of Technology Innovations in Renewable Energy 2014; 3(1): 31-5. http://dx.doi.org/10.6000/1929-6002.2014.03.01.5 DOI: https://doi.org/10.6000/1929-6002.2014.03.01.5
Arranz-Andrés J, Blau WJ. Enhanced device performance using different carbon nanotube types in polymer photovoltaic devices. Carbon 2008; 46(15): 2067-75. http://dx.doi.org/10.1016/j.carbon.2008.08.027 DOI: https://doi.org/10.1016/j.carbon.2008.08.027
Bundgaard E, Krebs FC. Low band gap polymers for organic photovoltaics. Solar Energy Materials and Solar Cells 2007; 91(11): 954-85. http://dx.doi.org/10.1016/j.solmat.2007.01.015 DOI: https://doi.org/10.1016/j.solmat.2007.01.015
Cai W, Gong X, Cao Y. Polymer solar cells: Recent development and possible routes for improvement in the performance. Solar Energy Materials and Solar Cells 2010; 94(2): 114-27. http://dx.doi.org/10.1016/j.solmat.2009.10.005 DOI: https://doi.org/10.1016/j.solmat.2009.10.005
Mozer AJ, Sariciftci NS. Conjugated polymer photovoltaic devices and materials. Comptes Rendus Chimie 2006; 9(5-6): 568-77. http://dx.doi.org/10.1016/j.crci.2005.03.033 DOI: https://doi.org/10.1016/j.crci.2005.03.033
Reyes-Reyes M, López-Sandoval R, Liu J, Carroll DL. Bulk heterojunction organic photovoltaic based on polythiophene-polyelectrolyte carbon nanotube composites. Solar Energy Materials and Solar Cells 2007; 91(15-16): 1478-82. http://dx.doi.org/10.1016/j.solmat.2007.04.023 DOI: https://doi.org/10.1016/j.solmat.2007.04.023
Wienk MM, Struijk MP, Janssen RAJ. Low band gap polymer bulk heterojunction solar cells. Chemical Physics Letters 2006; 422(4-6): 488-91. http://dx.doi.org/10.1016/j.cplett.2006.03.027 DOI: https://doi.org/10.1016/j.cplett.2006.03.027
Zhao DW, Tan ST, Ke L, Liu P, Kyaw AKK, Sun XW, et al. Optimization of an inverted organic solar cell. Solar Energy Materials and Solar Cells 2010; 94(6): 985-91. http://dx.doi.org/10.1016/j.solmat.2010.02.010 DOI: https://doi.org/10.1016/j.solmat.2010.02.010
Green MA, Emery K, Hishikawa Y, Warta W. Solar cell efficiency tables (version 37). Progress in Photovoltaics: Research and Applications 2011; 19(1): 84-92. http://dx.doi.org/10.1002/pip.1088 DOI: https://doi.org/10.1002/pip.1088
Service RF. Outlook Brightens for Plastic Solar Cells. Science 2011 April 15, 2011; 332(6027): 293. DOI: https://doi.org/10.1126/science.332.6027.293
Jørgensen M, Norrman K, Krebs FC. Stability/degradation of polymer solar cells. Solar Energy Materials and Solar Cells 2008; 92(7): 686-714. http://dx.doi.org/10.1016/j.solmat.2008.01.005 DOI: https://doi.org/10.1016/j.solmat.2008.01.005
Heremans P, Cheyns D, Rand BP. Strategies for Increasing the Efficiency of Heterojunction Organic Solar Cells: Material Selection and Device Architecture. Accounts of Chemical Research 2009; 42(11): 1740-7. http://dx.doi.org/10.1021/ar9000923 DOI: https://doi.org/10.1021/ar9000923
Minnaert B, Burgelman M. Efficiency Potential of Organic Bulk Heterojunction Solar Cells. Progress in Photovoltaics: Research and Applications 2007; 15: 741-8. http://dx.doi.org/10.1002/pip.797 DOI: https://doi.org/10.1002/pip.797
Gupta D, Mukhopadhyay S, Narayan KS. Fill factor in organic solar cells. Solar Energy Materials and Solar Cells 2010; 94(8): 1309-13. http://dx.doi.org/10.1016/j.solmat.2008.06.001 DOI: https://doi.org/10.1016/j.solmat.2008.06.001
Muhammad FF, Sulaiman K. Photovoltaic performance of organic solar cells based on DH6T/PCBM thin film active layers. Thin Solid Films 2011; 519(15): 5230-3. http://dx.doi.org/10.1016/j.tsf.2011.01.165 DOI: https://doi.org/10.1016/j.tsf.2011.01.165
Poortmans J, Arkhipov V. Thin Film Solar Cells Fabrication, Characterization and Applications. West Sussex PO19 8SQ, England: John Wiley & Sons Ltd.; 2006. http://dx.doi.org/10.1002/0470091282 DOI: https://doi.org/10.1002/0470091282
Guo T-F, Wen T-C, L'Vovich Pakhomov G, Chin X-G, Liou S-H, Yeh P-H, et al. Effects of film treatment on the performance of poly(3-hexylthiophene)/soluble fullerene-based organic solar cells. Thin Solid Films 2008; 516(10): 3138-42. http://dx.doi.org/10.1016/j.tsf.2007.08.066 DOI: https://doi.org/10.1016/j.tsf.2007.08.066
Spanggaard H, Krebs FC. A brief history of the development of organic and polymeric photovoltaics. Solar Energy Materials and Solar Cells 2004; 83(2-3): 125-46. http://dx.doi.org/10.1016/j.solmat.2004.02.021 DOI: https://doi.org/10.1016/j.solmat.2004.02.021
Chen L-M, Hong Z, Li G, Yang Y. Recent Progress in Polymer Solar Cells: Manipulation of Polymer: Fullerene Morphology and the Formation of Efficient Inverted Polymer Solar Cells. Advanced Materials 2009; 21(14-15): 1434-49. http://dx.doi.org/10.1002/adma.200802854 DOI: https://doi.org/10.1002/adma.200802854
Dennler G, Sariciftci NS. Flexible Conjugated Polymer-Based Plastic Solar Cells: From Basics to Applications. Proceedings of the IEEE 2005; 93(8): 1429-39. http://dx.doi.org/10.1109/JPROC.2005.851491 DOI: https://doi.org/10.1109/JPROC.2005.851491
Krebs FC. All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps. Organic Electronics 2009; 10(5): 761-8. http://dx.doi.org/10.1016/j.orgel.2009.03.009 DOI: https://doi.org/10.1016/j.orgel.2009.03.009
Liu F, Shao S, Guo X, Zhao Y, Xie Z. Efficient polymer photovoltaic cells using solution-processed MoO3 as anode buffer layer. Solar Energy Materials and Solar Cells 2010; 94(5): 842-5. http://dx.doi.org/10.1016/j.solmat.2010.01.004 DOI: https://doi.org/10.1016/j.solmat.2010.01.004
Djara V, Bernède JC. Effect of the interface morphology on the fill factor of plastic solar cells. Thin Solid Films 2005; 493(1-2): 273-7. http://dx.doi.org/10.1016/j.tsf.2005.06.098 DOI: https://doi.org/10.1016/j.tsf.2005.06.098
Hayashi Y, Hamada K, Takagi K, Takasu A, Takagi S, Soga T, editors. Investigation of PCBM Concentration on Photovoltaic Characteristics of Polymer Solar Cells with Blends of P3HT and PCBM. Conference Record of the 2006 IEEE 4th World Conference on Photovoltaic Energy Conversion; 2006 May 2006. DOI: https://doi.org/10.1109/WCPEC.2006.279443
Maennig B, Drechsel J, Gebeyehu D, Simon P, Kozlowski F, Werner A, et al. Organic p-i-n solar cells. Applied Physics A: Materials Science and Processing 2004; 79(1): 1-14. http://dx.doi.org/10.1007/s00339-003-2494-9 DOI: https://doi.org/10.1007/s00339-003-2494-9
Cheyns D, Poortmans J, Gommans H, Genoe J, Heremans P. Stacked organic solar cells increase efficiency. SPIE Newsroom 2007: 1-3. DOI: https://doi.org/10.1117/2.1200704.0731
Hadipour A, de Boer B, Blom PWM. Organic Tandem and Multi-Junction Solar Cells. Advanced Functional Materials 2008; 18(2): 169-81. http://dx.doi.org/10.1002/adfm.200700517 DOI: https://doi.org/10.1002/adfm.200700517
Kim JY, Lee K, Coates NE, Moses D, Nguyen T-Q, Dante M, et al. Efficient Tandem Polymer Solar Cells Fabricated by All-Solution Processing. Science 2007 July 13, 2007; 317(5835): 222-5. DOI: https://doi.org/10.1126/science.1141711
Yoo S, Potscavage Jr WJ, Domercq B, Han S-H, Li T-D, Jones SC, et al. Analysis of improved photovoltaic properties of pentacene/C60 organic solar cells: Effects of exciton blocking layer thickness and thermal annealing. Solid-State Electronics 2007; 51(10): 1367-75. http://dx.doi.org/10.1016/j.sse.2007.07.038 DOI: https://doi.org/10.1016/j.sse.2007.07.038
Vivo P, Jukola J, Ojala M, Chukharev V, Lemmetyinen H. Influence of Alq3/Au cathode on stability and efficiency of a layered organic solar cell in air. Solar Energy Materials and Solar Cells 2008; 92(11): 1416-20. http://dx.doi.org/10.1016/j.solmat.2008.06.002 DOI: https://doi.org/10.1016/j.solmat.2008.06.002
Kao P-C, Chu S-Y, Huang H-H, Tseng Z-L, Chen Y-C. Improved efficiency of organic photovoltaic cells using tris (8-hydroxy-quinoline) aluminum as a doping material. Thin Solid Films 2009; 517(17): 5301-4. http://dx.doi.org/10.1016/j.tsf.2009.03.147 DOI: https://doi.org/10.1016/j.tsf.2009.03.147
Cravino A, Sariciftci NS. Double-cable polymers for fullerene based organic optoelectronic applications. Journal of Materials Chemistry 2002; 12(7): 1931-43. http://dx.doi.org/10.1039/b201558g DOI: https://doi.org/10.1039/b201558g
Cravino A, Zerza G, Maggini M, Bucella S, Svensson M, Andersson MR, et al. A Soluble Donor–Acceptor Double-Cable Polymer: Polythiophene with Pendant Fullerenes. Monatshefte für Chemie / Chemical Monthly 2003; 134(4): 519-27. http://dx.doi.org/10.1007/s00706-002-0555-y DOI: https://doi.org/10.1007/s00706-002-0555-y
Zerza G, Cravino A, Neugebauer H, Sariciftci NS, Gómez R, Segura JL, et al. Photoinduced Electron Transfer in Donor−Acceptor Double-Cable Polymers: Polythiophene Bearing Tetracyanoanthraquinodimethane Moieties. The Journal of Physical Chemistry A 2001; 105(17): 4172-6. http://dx.doi.org/10.1021/jp0037448 DOI: https://doi.org/10.1021/jp0037448
Cureton LT, Beyer FL, Turner SR. Synthesis and characterization of hexafluoroisopropylidene bisphenol poly(arylene ether sulfone) and polydimethylsiloxane segmented block copolymers. Polymer 2010; 51(8): 1679-86. http://dx.doi.org/10.1016/j.polymer.2010.02.010 DOI: https://doi.org/10.1016/j.polymer.2010.02.010
Surapati M, Seino M, Hayakawa T, Kakimoto M-a. Synthesis of hyperbranched-linear star block copolymers by atom transfer radical polymerization of styrene using hyperbranched poly(siloxysilane) (HBPS) macroinitiator. European Polymer Journal 2010; 46(2): 217-25. http://dx.doi.org/10.1016/j.eurpolymj.2009.10.028 DOI: https://doi.org/10.1016/j.eurpolymj.2009.10.028
Stalmach U, de Boer B, Videlot C, van Hutten PF, Hadziioannou G. Semiconducting Diblock Copolymers Synthesized by Means of Controlled Radical Polymerization Techniques. Journal of the American Chemical Society 2000; 122(23): 5464-72. http://dx.doi.org/10.1021/ja000160a DOI: https://doi.org/10.1021/ja000160a
Masi JV, editor. Polymers: conductors, insulators, and active devices. Electrical Insulation Conference and Electrical Manufacturing & Coil Winding Technology Conference, 2003 Proceedings; 2003 23-25 Sept 2003.
Shirota Y. Organic materials for electronic and optoelectronic devices. Journal of Materials Chemistry 2000; 10(1): 1-25. http://dx.doi.org/10.1039/a908130e DOI: https://doi.org/10.1039/a908130e
Koeppe R, Sariciftci NS. Photoinduced charge and energy transfer involving fullerene derivatives. Photochemical & Photobiological Sciences 2006; 5(12): 1122-31. http://dx.doi.org/10.1039/b612933c DOI: https://doi.org/10.1039/b612933c
Muhammad FF, Abdul Hapip AI, Sulaiman K. Study of optoelectronic energy bands and molecular energy levels of tris (8-hydroxyquinolinate) gallium and aluminum organometallic materials from their spectroscopic and electrochemical analysis. Journal of Organometallic Chemistry 2010; 695(23): 2526-31. http://dx.doi.org/10.1016/j.jorganchem.2010.07.026 DOI: https://doi.org/10.1016/j.jorganchem.2010.07.026
Ye R, Baba M, Suzuki K, Mori K. Fabrication of highly air-stable ambipolar thin-film transistors with organic heterostructure of F16CuPc and DH-a6T. Solid-State Electronics 2008; 52(1): 60-2. http://dx.doi.org/10.1016/j.sse.2007.07.010 DOI: https://doi.org/10.1016/j.sse.2007.07.010
Chen Z, Ikeda S, Saiki K. Sexithiophene films on cleaved KBr(1 0 0) towards well-ordered semiconducting films. Materials Science and Engineering: B 2006; 133(1-3): 195-9. http://dx.doi.org/10.1016/j.mseb.2006.06.039 DOI: https://doi.org/10.1016/j.mseb.2006.06.039
Mu JY, Chen ZX, Luong TTT. X-ray diffraction investigations of well-ordered sexithiophene films deposited on flexible substrates. Journal of Materials Processing Technology 2009; 209(3): 1491-4. http://dx.doi.org/10.1016/j.jmatprotec.2008.03.055 DOI: https://doi.org/10.1016/j.jmatprotec.2008.03.055
Sato T, Fujitsuka M, Shiro M, Tanaka K. Photoluminescence quenching in oligothiophene single crystal. Synthetic Metals 1998; 95(2): 143-8. http://dx.doi.org/10.1016/S0379-6779(98)00048-4 DOI: https://doi.org/10.1016/S0379-6779(98)00048-4
Iosip MD, Destri S, Pasini M, Porzio W, Pernstich KP, Batlogg B. New dithieno[3,2-b: 2',3'-d]thiophene oligomers as promising materials for organic field-effect transistor applications. Synthetic Metals 2004; 146(3): 251-7. http://dx.doi.org/10.1016/j.synthmet.2004.08.004 DOI: https://doi.org/10.1016/j.synthmet.2004.08.004
Murphy AR, Fréchet JMJ, Chang P, Lee J, Subramanian V. Organic Thin Film Transistors from a Soluble Oligothiophene Derivative Containing Thermally Removable Solubilizing Groups. Journal of the American Chemical Society 2004; 126(6): 1596-7. http://dx.doi.org/10.1021/ja039529x DOI: https://doi.org/10.1021/ja039529x
Yamanari T, Taima T, Sakai J, Saito K. Origin of the open-circuit voltage of organic thin-film solar cells based on conjugated polymers. Solar Energy Materials and Solar Cells 2009; 93(6-7): 759-61. http://dx.doi.org/10.1016/j.solmat.2008.09.022 DOI: https://doi.org/10.1016/j.solmat.2008.09.022
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Journal of Technology Innovations in Renewable Energy
This work is licensed under a Creative Commons Attribution 4.0 International License.
Policy for Journals/Articles with Open Access
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are permitted and encouraged to post links to their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work
Policy for Journals / Manuscript with Paid Access
Authors who publish with this journal agree to the following terms:
- Publisher retain copyright .
- Authors are permitted and encouraged to post links to their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work .
