Practical Experience with Woody Biomass in a Down-Draft Gasifier

Deidre Wolff; Eilin Walsh; Kevin P. McDonnell

doi:10.6000/1929-6002.2013.02.01.6

Authors

Deidre Wolff School of Biosystems Engineering, University College Dublin, Belfield, Dublin 4, Ireland
Eilin Walsh School of Biosystems Engineering, University College Dublin, Belfield, Dublin 4, Ireland
Kevin P. McDonnell Crop Science, School of Agriculture, Food Science and Veterinary Medicine, University College Dublin, Belfield, Dublin 4, Ireland

DOI:

https://doi.org/10.6000/1929-6002.2013.02.01.6

Keywords:

Gasification, wood chip, wood pellets, willow (Salix sp.), renewable energy

Abstract

Gasification is the cleanest method of obtaining energy from fossil fuels, but with increasing awareness of depleting fossil fuel reserves attention has shifted towards renewable sources of energy. Any carbonaceous material can be gasified to generate high-value end-products from otherwise potentially low-value materials. Gasification can also generate energy from purpose-grown bioenergy crops, and Ireland has an ideal climate to produce woody biomass for energy generation. This update outlines some preliminary results from an investigation into the most suitable woody feedstock for small-scale localised gasification to produce a synthetic gas suitable for use in internal combustion engines. Argentinean- and German-standard wood pellets and Irish-grown willow chips were gasified in a down-draft gasifier. Operation of the gasifier led to the observation that the willow chips bridged within the feedstock hopper which prevented completion of gasification. Implementing a stirring bar in the feedstock hopper prevented bridging and gasification was then successful. Collection of the gas produced during gasification of willow chip was unsuccessful, however gas composition analysis indicates pellets which meet the German-standard are more suitable than Argentinean-standard pellets for use in a down-draft gasifier; work is underway to determine the composition of willow-derived synthetic gas to determine the most suitable feedstock for decentralised gasification by rural communities in Ireland as part of smart farming systems.

References

Rezaiyan J, Cheremisinoff NP. Gasification technologies - a primer for engineers and scientists. Boca Raton: Taylor & Francis Group 2005. DOI: https://doi.org/10.1201/9781420028140

GTC. Gasification - an investment in our energy future [report on the internet]. Arlington: Gasification Technologies Council; 2012 [cited 6th October 2012]: Available from http://www.gasification.org/uploads/downloads/Final_whitepaper.pdf

GTC. Gasification: the waste-to-energy solution [report on the internet]. Arlington: Gasification Technologies Council; 2012 [cited 6th October 2012]: Available from http://www.gasification.org/uploads/downloads/GTC_Waste_to_Energy.pdf

McKendry P. Energy production from biomass (part 3): gasification technologies. Bioresource Technol 2002; 83: 55-63. http://dx.doi.org/10.1016/S0960-8524(01)00120-1 DOI: https://doi.org/10.1016/S0960-8524(01)00120-1

McKendry P. Energy production from biomass (part 1): overview of biomass. Bioresource Technol 2002; 83: 37-46. http://dx.doi.org/10.1016/S0960-8524(01)00118-3 DOI: https://doi.org/10.1016/S0960-8524(01)00118-3

Rice B. Supplying the biofuels sector [report on the internet]. Carlow: Teagasc; 2007 [cited 28th October 2012]: Available from http://www.teagasc.ie/publications/2007/20070131/ ntc2007paper03.asp

DAFM. Annual review and outlook for agriculture, food and the marine 2011/2012 [report on the internet]. Dublin: Department of Agriculture, Food and the Marine; 2012 [cited 02 November 2012]: Available from http://www. agriculture.gov.ie/media/migration/publications/2012/ARO201112170912.pdf

Fagan CC, Everard CD, McDonnell K. Prediction of moisture, calorific value, ash and carbon content of two dedicated bioenergy crops using near-infrared spectroscopy. Bioresource Technol 2011; 102: 5200-6. http://dx.doi.org/10.1016/j.biortech.2011.01.087 DOI: https://doi.org/10.1016/j.biortech.2011.01.087

Peksa-Blanchard M, Dolzan P, Grassi A, Heinimö J, Junginger M, Ranta T, et al. IEA bioenergy task 40: global wood pellets markets and industry: policy drivers, market status and raw material potential [report on the internet]. Paris: International Energy Agency; 2007 [cited 24th October 2012]: Available from http://igitur-archive.library.uu.nl/chem/ 2008-0424-200431/NWS-E-2007-121.pdf

Wu MR, Schott DL, Lodewijks G. Physical properties of solid biomass. Biomass Bioenerg 2011; 35: 2093-105. http://dx.doi.org/10.1016/j.biombioe.2011.02.020 DOI: https://doi.org/10.1016/j.biombioe.2011.02.020

Gupta RB, Demirbas A. Gasoline, diesel and ethanol biofuels from grasses and plants. New York: Cambridge University Press 2010. http://dx.doi.org/10.1017/CBO9780511779152 DOI: https://doi.org/10.1017/CBO9780511779152

Bangala DN, Abatzoglou N, Martin JP, Chornet E. Catalytic gas conditioning: application to biomass and waste gasification. Ind Eng Chem Res 1997; 36: 4184-92. http://dx.doi.org/10.1021/ie960785a DOI: https://doi.org/10.1021/ie960785a

Kuusela K. Forest resources in Europe, 1950-1990. Cambridge: Cambridge University Press 1994. DOI: https://doi.org/10.1017/CBO9780511752285

BSI. Solid biofuels - methods for the determination of moisture content - oven dry method - part 2: total moisture - simplified method. Brussels: British Standards Institute 2004.

BSI. Solid biofuels - method for the determination of ash content. Brussels: British Standards Institute 2004.

Erlich C, Fransson TH. Downdraft gasification of pellets made of wood, palm-oil residues respective bagasse: experimental study. Appl Energ 2011; 88: 899-908. http://dx.doi.org/10.1016/j.apenergy.2010.08.028 DOI: https://doi.org/10.1016/j.apenergy.2010.08.028

Klass DL. Biomass for Renewable Energy, Fuels, and Chemicals. San Diego: Academic Press 1998.