Mechanical, Thermal, and Morphological Analysis of 3D-Printed Polylactic Acid–Polyester Urethane Blends with Varied Infill and Material Compositions
DOI:
https://doi.org/10.6000/1929-5995.2025.14.05Keywords:
Additive manufacturing, 3D printing, Poly lactic acid, Thermoplastic polyurethaneAbstract
Multimaterial 3D printing allows for the production of intricate parts with customized mechanical properties, enhancing the versatility of material extrusion additive manufacturing. Typically, 3D printing machines are fed with commercially available filament feedstock, which limits the 3D printing of multiple materials. Hence, this study introduces in-house prepared filaments for creating polymer blend structures with improved properties. In this study, polylactic acid and thermoplastic poly ester urethane (PEU) blends with different composition ratios were processed by varying the infill densities to evaluate their impacts on their thermal, mechanical and morphological properties. The effects of infill percentage on the mechanical, thermal and morphological behaviour were investigated. The results indicate that increasing the infill percentage tends to significantly increase the elastic modulus and tensile strength. The maximum strain increased as the infill percentage increased. Overall, the mechanical results indicated that, without sacrificing any tensile strength, the composite with 25% PEU exhibited better toughness than did the neat PLA and could be printed similarly to that of PLA. Furthermore, scanning electron images revealed that the blends had a homogeneous structure with a fibrillar morphology. These results indicate that 3D printing is an effective technique for creating next generation 4D materials.
References
Ngo TD, Kashani A, Imbalzano G, Nguyen KT, Hui D. Additive manufacturing (3D printing): A review of materials, methods, applications and challenges. Compos Part B Eng 2018; 143: 172-96. (Google Scholar) DOI: https://doi.org/10.1016/j.compositesb.2018.02.012
Hajare DM, Gajbhiye TS. Additive manufacturing (3D printing): Recent progress on advancement of materials and challenges. Mater Today Proc 2022; 58: 736-43. (Google Scholar) DOI: https://doi.org/10.1016/j.matpr.2022.02.391
Ashrith HS, Jeevan TP, Divya HGV. 3D Printing of Crystalline Polymers. In: Polymer Crystallization: Methods, Characterization and Applications 2023. p. 233-54. (Google Scholar) DOI: https://doi.org/10.1002/9783527839247.ch9
Xiu H, Zhou Y, Dai J, Huang C, Bai H, Zhang Q, et al. RSC Adv 2014; 4: 37193. (Google Scholar) DOI: https://doi.org/10.1039/C4RA06836J
Puttaswamy JT, Puttegowda M, TG YG, Vedavathi DH. Evolution and recent advancements of composite materials in rapid prototyping. In Applications of Composite Materials in Engineering 2025. p. 169-193. (Google Scholar) DOI: https://doi.org/10.1016/B978-0-443-13989-5.00007-3
Jaso V, Cvetinov M, Rakić S, Petrović ZS. J Appl Polym Sci 2015; 131. DOI: 10.1002/app.41104. (Google Scholar) DOI: https://doi.org/10.1002/app.41104
Azarmgin S, Torabinejad B, Kalantarzadeh R, Garcia H, Velazquez CA, Lopez G, et al. Polyurethanes and their biomedical applications. ACS Biomater Sci Eng 2024; 10(11): 6828-59. (Google Scholar) DOI: https://doi.org/10.1021/acsbiomaterials.4c01352
Zhu G, Wu M, Ding Z, Zou T, Wang L. Biological properties of polyurethane: Issues and potential for application in vascular medicine. Eur Polym J 2023; 112536. (Google Scholar) DOI: https://doi.org/10.1016/j.eurpolymj.2023.112536
Chen Q, Mangadlao JD, Wallat J, Leon AD, Pokorski JK, Advincula RC. ACS Appl Mater Interfaces 2017; 9: 4015. (Google Scholar) DOI: https://doi.org/10.1021/acsami.6b11793
Ferreira RTL, Amatte IC, Dutra TA, Bürger D. Compos Part B Eng 2017; 124: 88. (Google Scholar) DOI: https://doi.org/10.1016/j.compositesb.2017.05.013
Santo J, Pradhik V, Kalakoti S, Saravanan P, Penumakala PK. Effect of composite processing technique on tribological properties of 3D printed PLA-graphene composites. Tribol Int 2024; 198: 109895. (Google Scholar) DOI: https://doi.org/10.1016/j.triboint.2024.109895
Hanon MM, Ghaly A, Zsidai L, Klebert S. Tribological characteristics of digital light processing (DLP) 3D printed graphene/resin composite: Influence of graphene presence and process settings. Mater Des 2022; 218: 110718. (Google Scholar) DOI: https://doi.org/10.1016/j.matdes.2022.110718
Banupriya R, Jeevan TP, Divya HV, Yashas Gowda TG, Manjunath GA. 3D printed graphene-reinforced composites: Opportunities and challenges. Polym Compos 2024. (Google Scholar) DOI: https://doi.org/10.1002/pc.29068
Rachaiah B, Puttaswamy JT, Nagaraju SB, Vedavathi DH. Investigation on the wear characteristics of 3D printed graphene-reinforced PLA composites. Discov Mater 2024; 4(1): 1-11. (Google Scholar) DOI: https://doi.org/10.1007/s43939-024-00152-z
Doshi M, Mahale A, Singh SK, Deshmukh S. Printing parameters and materials affecting mechanical properties of FDM-3D printed parts: Perspective and prospects. Mater Today Proc 2022; 50: 2269-75. (Google Scholar) DOI: https://doi.org/10.1016/j.matpr.2021.10.003
Lanzotti A, Grasso M, Staiano G, Martorelli M. The impact of process parameters on mechanical properties of parts fabricated in PLA with an open-source 3D printer. Rapid Prototyp J 2015; 21(5): 604-17. (Google Scholar) DOI: https://doi.org/10.1108/RPJ-09-2014-0135
Hmeidat NS, Brown B, Jia X, Vermaak N, Compton B. Effects of infill patterns on the strength and stiffness of 3D printed topologically optimized geometries. Rapid Prototyp J 2021; 27(8): 1467-79. (Google Scholar) DOI: https://doi.org/10.1108/RPJ-11-2019-0290
Qian K, Qian X, Chen Y, Zhou M. Poly(lactic acid)-thermoplastic poly(ether) urethane composites synergistically reinforced and toughened with short carbon fibers for three-dimensional printing. J Appl Polym Sci 2018; 135(29): 46483. (Google Scholar) DOI: https://doi.org/10.1002/app.46483
Buys YF, Ahmad MS, Anuar H, Mahmud MS, Nasir NAM. Mechanical properties, morphology, and hydrolytic degradation behavior of polylactic acid/thermoplastic polyurethane blends. IIUM Eng J 2020; 21(1): 193-201. (Google Scholar) DOI: https://doi.org/10.31436/iiumej.v21i1.1051
Jaso V, Glenn G, Klamczynski A, Petrović ZS. Biodegradability study of polylactic acid/thermoplastic polyurethane blends. Polym Test 2015; 47: 1-3. DOI: 10.1016/j.polymertesting.2015.07.011. (Google Scholar) DOI: https://doi.org/10.1016/j.polymertesting.2015.07.011
de Melo Morgado GF, de Moura NK, Martins EF, Escanio CA, Backes EH, Marini J, et al. Effect of blend ratio on thermal, mechanical, and shape memory properties of poly(lactic acid)/thermoplastic polyurethane bioblends. J Polym Res 2022; 29(12): 533. (Google Scholar) DOI: https://doi.org/10.1007/s10965-022-03389-5
Fang H, Zhang L, Chen A, Wu F. Improvement of mechanical property for PLA/PEU blend by adding PLA-PEU copolymers prepared via in situ ring-opening polymerization. Polymers 2022; 14(8): 1530. (Google Scholar) DOI: https://doi.org/10.3390/polym14081530
Wu Y, An C, Guo Y. 3D printed graphene and graphene/polymer composites for multifunctional applications. Materials 2023. (Google Scholar) DOI: https://doi.org/10.3390/ma16165681
Raths M, Bauer L, Kuettner A, Fischer S, Laumer T. Gradual error detection technique for nondestructive assessment of density and tensile strength in fused filament fabrication processes. Int J Adv Manuf Technol 2024; 131(7): 4149-63. (Google Scholar) DOI: https://doi.org/10.1007/s00170-024-13280-w
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Policy for Journals/Articles with Open Access
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are permitted and encouraged to post links to their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work
Policy for Journals / Manuscript with Paid Access
Authors who publish with this journal agree to the following terms:
- Publisher retain copyright .
- Authors are permitted and encouraged to post links to their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work .
