Dr. Chen Li is an Associate Professor and a Master Supervisor of Aerospace Manufacturing Engineering at Harbin Institute of Technology, China. He was awarded the 10th Hiwin Doctoral Dissertation Award in 2020. He received his Bachelor degree in Process Equipment and Control Engineering from Northeastern University in 2015, China, and the PhD degree in Aerospace Manufacturing Engineering from Harbin Institute of Technology in 2019, China. From 2018 to 2019 he worked as a visiting scholar in The University of Queensland, Australia. His research interests focus on ultra-precision machining and micro/nano manufacture. His work was supported by National key R & D program, 973 program, National Natural Science Foundation, etc. He published more than 50 peer-reviewed scientific research papers, and the total citation number of these publications is more than 800. He is a member of Production Engineering Committee of Chinese Mechanical Engineering Society, Member of Heilongjiang Standardization Technical Committee for Instrument, Editorial board members of several academic journals and peer reviewers of more than 20 academic journals indexed by SCI, such as International Journal of Machine Tools & Manufacture, Journal of the European Ceramic Society, International Journal of Mechanical Sciences, Optics Express, Ceramics International, etc. He received the Outstanding Contribution Award at CCAT2017, Excellent Young Researcher Award at the CJUMP 2016, Excellent Paper Award at the CJUMP2015, Excellent Young Paper Award at the CCAT2017, etc.
Representative Publications:
[1] Li C, Li X, Wu Y, et al. Deformation mechanism and force modelling of the grinding of YAG single crystals. International Journal of Machine Tools and Manufacture, 2019, 143: 23-37.
[2] Li, C., Piao, Y., Meng, B., Hu, Y., Li, L., & Zhang, F. Phase transition and plastic deformation mechanisms induced by self-rotating grinding of GaN single crystals. International Journal of Machine Tools and Manufacture, 2022, 172: 103827.
[3] Li C, Zhang F, Meng B, et al. Research of material removal and deformation mechanism for single crystal GGG (Gd3Ga5O12) based on varied-depth nanoscratch testing. Materials & Design, 2017, 125: 180-188.
[4] Li C, Li X, Huang S, et al. Ultra-precision grinding of Gd3Ga5O12 crystals with graphene oxide coolant: Material deformation mechanism and performance evaluation. Journal of Manufacturing Processes, 2021, 61: 417–427.
[5] Li C, Wu Y, Li X, et al. Deformation characteristics and surface generation modelling of crack-free grinding of GGG single crystals. Journal of Materials Processing Technology, 2020, 279(5): 116577.
[6] Li C, Zhang F, Wang X, et al. Repeated nanoscratch and double nanoscratch tests of Lu2O3 transparent ceramics: Material removal and deformation mechanism, and theoretical model of penetration depth. Journal of the European Ceramic Society, 2018, 38(2): 705-718.
[7] Li C, Zhang F, Meng B, et al. Material removal mechanism and grinding force modelling of ultrasonic vibration assisted grinding for SiC ceramics. Ceramics International, 2017, 43: 2981-2993.
[8] Li C, Piao Y, Meng B, et al. Anisotropy dependence of material removal and deformation mechanisms during nanoscratch of gallium nitride single crystals on (0001) plane. Applied Surface Science. 2022, 578: 152028.
[9] Y Zhang, Q Wang, C Li*, et al. Characterization of surface and subsurface defects induced by abrasive machining of optical crystals using grazing incidence X-ray diffraction and molecular dynamics. Journal of Advanced Research, 2022, 26, 51-61.
[10] Li C, Zhang F, Wu Y, et al. Influence of strain rate effect on material removal and deformation mechanism based on ductile nanoscratch tests of Lu2O3 single crystal. Ceramics International, 2018, 44(17): 21486-21498.
[11] Li C, Piao Y, Hu Y, et al. Modelling and experimental investigation of temperature field during fly-cutting of KDP crystals. International Journal of Mechanical Sciences, 2021, 210: 106751.
[12] Li C, Zhang Y, Zhou G, et al. Theoretical modelling of brittle-to-ductile transition load of KDP crystals on (001) plane during nanoindentation and nanoscratch tests. Journal of Materials Research and Technology, 2020, 9(6): 14142-14157.
[13] Li C, Zhang F, Piao Y. Strain-rate dependence of surface/subsurface deformation mechanisms during nanoscratching tests of GGG single crystal. Ceramics International, 2019, 45(12): 15015-15024.
[14] Li C, Zhang Q, Zhang Y, et al. Nanoindentation and nanoscratch tests of YAG single crystals: an investigation into mechanical properties, surface formation characteristic, and theoretical model of edge-breaking size. Ceramics International, 2020, 46(3): 3382-3393.
[15] Li, C., Hu, Y., Huang, S., Meng, B., Piao, Y., & Zhang, F. Theoretical model of warping deformation during self-rotating grinding of YAG wafers. Ceramics International. 2022, 48, 4637-4648.
[16] Li C, Zhang F, Ma Z, et al. Modeling and experiment of surface error for large-aperture aspheric SiC mirror based on residual height and wheel wear. International Journal of Advanced Manufacturing Technology, 2017, 91(1-4): 13-24.
[17] Li C, Zhang F, Ma Z. Study on grinding surface deformation and sub surface damage mechanism of RB-SiC ceramics. Proceedings of the Institution of Mechanical Engineers-Part B: Journal of Engineering Manufacture, 2018, 232: 1986-1995.
[18] Li C, Zhang F, Ding Y, et al. et al. Surface deformation and friction characteristic of nano scratch at ductile-removal regime for optical glass BK7. Applied Optics, 2016, 55: 6547-6553.
[19] Li C, Zhang F, Wang X, et al. Investigation on surface/subsurface deformation mechanism and mechanical properties of GGG single crystal induced by nanoindentation. Applied Optics, 2018, 57(14): 3661-3668.
[20] Li C, Zhang F, Meng B, et al. Simulation and experiment on surface morphology and mechanical properties response in nano-indentation of 6H-SiC. Journal of Materials Engineering and Performance, 2017, 26(3): 1000-1009.
[21] Dong G, Lang C, Li C*, et al. Formation mechanism and modelling of exit edge-chipping during ultrasonic vibration grinding of deep-small holes of microcrystalline-mica ceramics. Ceramics International. 2020, 46(8): 12458-12469.
[22] Rao X, Zhang F, Lu Y, Luo X*, Ding F, Li C*. Analysis of diamond wheel wear and surface integrity in laser-assisted grinding of RB-SiC ceramics. Ceramics International, 2019, 45(18): 24355-24364.
[23] Dong G, Wang L, Li C*, Yu Y. Investigation on ultrasonic elliptical vibration boring of deep holes with large depth-diameter ratio for high strength steel 18Cr2Ni4WA. International Journal of Advanced Manufacturing Technology. 2020, 108(5), 1527-1539.
[24] Zhang Y, Wu T, Li C*, et al. Investigation on path optimization and look-ahead speed control algorithm during numerical control grinding of dentures of glass ceramics. International Journal of Advanced Manufacturing Technology, 2021, 113, 1899-1913.
[25] Zhang F, Li C*, Zhao H, et al. Simulation and experiment of double grits interacting scratch for optical glass BK7. Journal of Wuhan University of Technology-Materials Science Edition. 2018, 33(1): 15-22.
